Stack and reach
How high and how far forward the top of the head tube is, from the bottom bracket. They are the two numbers that decide whether a frame can be set up like yours.
BB, or bottom bracket
The axle your cranks turn on, in the middle of the frame. Every number on this site is measured from it, because it is the one point that sits in the same place on every bike.
Headset cover
The little cap on top of the head tube, under your spacers. Most makers do not publish it, so I assume 15 mm and add 6 mm to the band, which on its own is enough to hold an answer at "probably" rather than "fits".
Stem clamp, and its centre
The collar on the steerer that your stem bolts to. I need the middle of it. Where a maker gives only the height, I assume halfway up and say so on the answer.
Steerer
The tube coming up out of the fork. The cover, the spacers and the stem all sit on it, and it is the thing a mechanic cuts to length.
Bar reach
How far forward the hoods sit from the middle of the bar. Two bars on the same stem can put your hands 20 mm apart, which is why I ask.
Setback
How far your saddle sits behind the bottom bracket.
Drop
How much lower your bar is than your saddle.
Rails, and the rail centre
The two rods under your saddle, and the middle of the straight part of them. That midpoint is the point I use, because it is the one you can find with a tape.
The band
How far out I could be, in millimetres, and why. It is a straight sum of everything I had to assume rather than a clever average, so it errs wide on purpose.
wb, stand, trail
Wheelbase, standover and trail: how long the bike is, how high the top tube is where you straddle it, and how steady the steering feels. I show them against your bike, and I leave them out when the maker does not publish them.
est.
Estimated: a number I worked out rather than read off the maker's table. Anything marked this way can move if the maker publishes the real one.
Close Escape closes it. The measuring guide has the pictures. Open the measuring guide
Pardus Uragano Sport
Gravel · 6 sizes
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Pardus Uragano Sport · Gravel · 6 sizes
- Geometry
- pardusbicycle.com, fetched 29 Aug 2026, re-checked, no differences
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 15 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 6 September 2026 · 210 bikes, 43 makes, 1,262 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.| Size | Stack (mm) | Reach (mm) | Head angle (deg) | Seat angle (deg) | Head tube (mm) | Chainstay (mm) | Wheelbase (mm) | Standover (mm) |
|---|---|---|---|---|---|---|---|---|
| XS | 535 | 356 | 70 | 75 | 115 | 430 | 1002 | 760 |
| S | 554 | 366 | 70 | 74.5 | 135 | 430 | 1019 | 778 |
| M | 567 | 372 | 70.5 | 74 | 147 | 430 | 1024 | 798 |
| L | 582 | 378 | 71 | 73.5 | 159 | 430 | 1025 | 808 |
| XL | 600 | 386 | 71 | 73.5 | 178 | 430 | 1039 | 825 |
| XXL | 624 | 400 | 71 | 73 | 203 | 430 | 1062 | 854 |
The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The L drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Generic stem and barAssumedNo bar is listed for this frame.
In the maker's words
Kept whole, as I read it off pardusbicycle.com.NOT integrated: two-piece cockpit on both builds.
Cockpit and seatpost, in the maker's words · 180 words
NOT integrated: two-piece cockpit on both builds. Handlebar: FSA Adventure AGX (bar width per size NOT published; FSA's AGX is a flared alloy gravel bar but flare, reach and drop are not stated on the Pardus page). Stem: Vision SMR (stem length per size NOT published; angle not stated). Seatpost: listed only as "Carbon" (diameter, offset/setback and length NOT published). Spacers, headset, top cap / headset cover height and maximum steerer stack: NOT published. Saddle: Selle Italia Model X. Two complete-bike builds are listed, no frameset option shown: URAGANO SPORT - RIVAL AXS (SRAM Rival AXS E1 levers, Rival XPLR AXS 13-speed rear mech, Rival Wide 38T crank, XPLR 10-46T cassette, Rival hydraulic discs, MVMT carbon tubeless wheels H35 C25) and URAGANO SPORT - APEX (SRAM Apex SD-APX-D1 levers, Apex RD-APX-1-D1 rear mech 44T max, Apex Wide 38T crank, XPLR 11-44T cassette, 12-speed chain, Apex hydraulic discs, Pardus tubeless alloy wheels). Both: SRAM Centerline 160 mm centre-lock rotors, Vittoria Terreno Dry 700x40 tyres, carbon frame and fork, 12x142 mm rear and 12x100 mm front thru axles. Tyre clearance: NOT published.
STACK DATUM: per the maker's lettered diagram, S (Stack) is the vertical from the bottom bracket centre to the top centre of the head tube and R (Reach) is the horizontal from the BB centre to the same point - the standard convention. Source: html_table (Pardus Europe official regional site, "Geometry" tab HTML table + lettered geometry diagram image)
How I read the maker's table
SEAT ANGLE: labelled only "D Seat tube angle"; effective vs actual is not stated. The diagram draws D at the BB between the horizontal and a dashed line along the seat tube axis, and the seat tube is a straight tube meeting the BB, so actual and effective coincide in practice; left null because the maker does not use either word. SIZES: named XS / S / M / L / XL / XXL only; the seat tube length row (I) is 480 / 500 / 520 / 540 / 560 / 580, which is the nearest thing to a numeric size. TABLE QUIRKS: the letter "R" is used for both "Top tube length" and "Reach" in the table; on the diagram the long horizontal R (seat tube axis at the seat tube top to the head tube top centre) is the effective/horizontal top tube and the short R is reach. "Standover" has no letter and no measurement point stated (assumed mm at the top tube). Lengths are printed without units (assumed mm, consistent with the values); angles carry degree signs. Also published but not in the schema: L Fork length 396 mm (axle to crown, all sizes) and a Stack/Reach ratio row 1.50 / 1.51 / 1.52 / 1.54 / 1.55 / 1.56 (derived by the maker). TRAIL is published by the maker (74 / 74 / 74 / 73 / 73 / 73) with head angle 70 / 70 / 70.5 / 71 / 71 / 71 and fork offset 50 / 50 / 50 / 45 / 45 / 45. Rider height / sizing guide: NOT published on the page. MODEL YEAR: not stated anywhere on the page; the WordPress record is datePublished 2026-05-23 and dateModified 2026-05-25, and the diagram image lives under /uploads/2026/05/, so treat as the 2026 season but left null because the maker does not print a year. OFFICIAL SOURCE STATUS: pardusbicycle.com is Pardus Europe S.r.l. (Viale dei Colli Euganei 14, 35041 Battaglia Terme PD, Italy), the brand's official European site, with EN and FR versions of the same page; the global store www.pardus-bikes.com returned HTTP 402 "Store unavailable" on 2026-08-29 so it could not be cross-checked. No aggregator was used. The geometry image (https://pardusbicycle.com/wp-content/uploads/2026/05/uragano_Telaio_Geometrie_Trasparente-1024x715.png) is a lettered line drawing without numbers and was read only for the letter key; the numbers above come from the HTML table.
