Stack and reach
How high and how far forward the top of the head tube is, from the bottom bracket. They are the two numbers that decide whether a frame can be set up like yours.
BB, or bottom bracket
The axle your cranks turn on, in the middle of the frame. Every number on this site is measured from it, because it is the one point that sits in the same place on every bike.
Headset cover
The little cap on top of the head tube, under your spacers. Most makers do not publish it, so I assume 15 mm and add 6 mm to the band, which on its own is enough to hold an answer at "probably" rather than "fits".
Stem clamp, and its centre
The collar on the steerer that your stem bolts to. I need the middle of it. Where a maker gives only the height, I assume halfway up and say so on the answer.
Steerer
The tube coming up out of the fork. The cover, the spacers and the stem all sit on it, and it is the thing a mechanic cuts to length.
Bar reach
How far forward the hoods sit from the middle of the bar. Two bars on the same stem can put your hands 20 mm apart, which is why I ask.
Setback
How far your saddle sits behind the bottom bracket.
Drop
How much lower your bar is than your saddle.
Rails, and the rail centre
The two rods under your saddle, and the middle of the straight part of them. That midpoint is the point I use, because it is the one you can find with a tape.
The band
How far out I could be, in millimetres, and why. It is a straight sum of everything I had to assume rather than a clever average, so it errs wide on purpose.
wb, stand, trail
Wheelbase, standover and trail: how long the bike is, how high the top tube is where you straddle it, and how steady the steering feels. I show them against your bike, and I leave them out when the maker does not publish them.
est.
Estimated: a number I worked out rather than read off the maker's table. Anything marked this way can move if the maker publishes the real one.
Close Escape closes it. The measuring guide has the pictures. Open the measuring guide
Pardus Robin Evo
Road · 5 sizes
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Pardus Robin Evo · Road · 5 sizes · integrated cockpit
- Geometry
- pardusbicycle.com, fetched 29 Aug 2026, re-checked, no differences
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 15 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 6 September 2026 · 210 bikes, 43 makes, 1,262 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The M drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Generic stem and barAssumedNo bar is listed for this frame.
In the maker's words
Kept whole, as I read it off pardusbicycle.com.INTEGRATED one-piece bar/stem on the only build listed ("ROBIN EVO - SHIMANO ULTEGRA Di2"): HANDLEBAR "MVMT M-SILVER Carbon, Integrated Handlebar"; STEM row printed as "------" (no separate stem).
Cockpit and seatpost, in the maker's words · 166 words
INTEGRATED one-piece bar/stem on the only build listed ("ROBIN EVO - SHIMANO ULTEGRA Di2"): HANDLEBAR "MVMT M-SILVER Carbon, Integrated Handlebar"; STEM row printed as "------" (no separate stem). Bar width, stem length, stem angle, bar reach/drop, clamp or stack height, headset cover height and spacer allowance are NOT published anywhere on the page, so stock_stem_length and stock_bar_width are null for every size. SEATPOST: "Carbon, -15mm offset" (single offset stated; post length and alternative offsets not published). SADDLE: MVMT Silver, carbon rail. Rest of the build: Shimano Ultegra Di2 2x12 (52-36T, 11-30T, rear mech max 34T), Ultegra hydraulic discs with Center Lock rotors F160 / R140 mm, MVMT SILVER50 carbon wheels (H50, C23, tubeless ready, carbon spokes), Continental GrandPrix tyres (width not stated). Frame: ROBIN EVO carbon, 12x142 mm thru axle; fork: ROBIN EVO carbon, 12x100 mm thru axle, flat mount disc. No frameset-only listing, no per-size bar/stem chart and no rider-height sizing chart on the page (the "Sizes" strip just lists XS S M L XL).
SOURCE: https://pardusbicycle.com/bikes/robin-evo/ is the site of Pardus Europe S.r.l. Source: html_table (maker's site, "Geometry" tab is an HTML table, class nkcs-csv-table, next to a geometry diagram image
How I read the maker's table
(Viale dei Colli Euganei 14, 35041 Battaglia Terme (PD), Italy; info@pardus-bikes.com), the maker's own European site, fetched 2026-08-29 (HTTP 200, 102,375 bytes). The maker's other hosts were tried and gave nothing better: https://www.pardus-bikes.com/ answered HTTP 402 "Store unavailable" (Shopify), https://pardusbikes.com/ fails TLS (certificate does not match the host); the page's FR language switcher points at a separate domain, cyclespardus.fr, which was not fetched. Page copy: "Robin EVO is an ultra-light climbing bike", listed under Road Bikes, hence category "climbing road". MODEL YEAR: not stated by the maker anywhere on the page; the page's images were uploaded 2026-05, article:modified_time is 2026-07-16 and the footer is Copyright 2026, so this is the current (2026-season) page, model_year left null. UNITS: the table prints bare numbers; millimetres and degrees assumed (values are consistent with mm). STACK / REACH DATUM: the maker's geometry diagram draws S (stack) as the vertical distance from the bottom bracket centre to a horizontal line through the top of the head tube and R (reach) as the horizontal distance from the BB centre to that same head-tube-top point, i.e. the usual frame stack/reach with no headset or cockpit included; the table simply says "Stack" and "Reach" with no code letter. TOP TUBE: printed as "N Top tube length" with no effective/actual wording; the diagram's top tube length B is drawn as a horizontal line from the head tube top to the seat post axis, so it is mapped to top_tube_effective (assumed). HEAD TUBE LENGTH is "L Head tube length". SIZE NAMES: XS, S, M, L, XL only; no cm equivalents printed; seat_tube_length is the table's "ST Seat tube length" (453/464/487/502/521). COLUMNS NOT IN THE SCHEMA: "G Fork length" = 370/370/370/370/370 (all sizes) and the maker's printed "Stack/Reach ratio" = 1.33/1.35/1.39/1.42/1.43 (XS to XL). "FC Front center" and "TRAIL" are printed by the maker (not derived here). DIAGRAM LETTERS DO NOT MATCH THE TABLE CODES: the diagram uses B/C/D/E/F/G/H/I/J/K/L/R/S (where F is the chainstay and G the front centre) while the table uses Q7/N/Q1/F/L/H/G/RC/FC/WB/ST (where F is fork offset and G is fork length); the diagram is a generic Pardus drawing, so only the table codes and labels were used for the mapping. CONSISTENCY: with the printed bb_drop, front_centre and chainstay, the horizontal wheelbase works out to 972.5 (XS), 976.8 (S), 980.1 (M), 989.2 (L), 1003.3 (XL) against the printed 977/978/980/990/1004, so the XS wheelbase is about 4-5 mm more than the other columns imply; recorded exactly as printed and flagged here, not corrected. Printed trail (65/56/58/58/58) is consistent with the printed head angles and fork offsets for a roughly 700x28 wheel. Nothing was taken from Panda Podium, Geometry Geeks, Bike Insights or 99 Spokes; no Panda Podium request was made for this file.
Source: html_table (maker's site, "Geometry" tab is an HTML table, class nkcs-csv-table, next to a geometry diagram image https://pardusbicycle.com/wp-content/uploads/2026/05/ROBINEVO_Telaio_Geometrie_Trasparente-1024x770.png; the table is the source of every number, the diagram was read only for the datum conventions and was not stored)
