Pardus Robin Evo

INTEGRATED one-piece bar/stem on the only build listed ("ROBIN EVO - SHIMANO ULTEGRA Di2"): HANDLEBAR "MVMT M-SILVER Carbon, Integrated Handlebar"; STEM row printed as "------" (no separate stem). Bar width, stem length, stem angle, bar reach/drop, clamp or stack height, headset cover height and spacer allowance are NOT published anywhere on the page, so stock_stem_length and stock_bar_width are null for every size. SEATPOST: "Carbon, -15mm offset" (single offset stated; post length and alternative offsets not published). SADDLE: MVMT Silver, carbon rail. Rest of the build: Shimano Ultegra Di2 2x12 (52-36T, 11-30T, rear mech max 34T), Ultegra hydraulic discs with Center Lock rotors F160 / R140 mm, MVMT SILVER50 carbon wheels (H50, C23, tubeless ready, carbon spokes), Continental GrandPrix tyres (width not stated). Frame: ROBIN EVO carbon, 12x142 mm thru axle; fork: ROBIN EVO carbon, 12x100 mm thru axle, flat mount disc. No frameset-only listing, no per-size bar/stem chart and no rider-height sizing chart on the page (the "Sizes" strip just lists XS S M L XL).

(Viale dei Colli Euganei 14, 35041 Battaglia Terme (PD), Italy; info@pardus-bikes.com), the maker's own European site, fetched 2026-08-29 (HTTP 200, 102,375 bytes). The maker's other hosts were tried and gave nothing better: https://www.pardus-bikes.com/ answered HTTP 402 "Store unavailable" (Shopify), https://pardusbikes.com/ fails TLS (certificate does not match the host); the page's FR language switcher points at a separate domain, cyclespardus.fr, which was not fetched. Page copy: "Robin EVO is an ultra-light climbing bike", listed under Road Bikes, hence category "climbing road". MODEL YEAR: not stated by the maker anywhere on the page; the page's images were uploaded 2026-05, article:modified_time is 2026-07-16 and the footer is Copyright 2026, so this is the current (2026-season) page, model_year left null. UNITS: the table prints bare numbers; millimetres and degrees assumed (values are consistent with mm). STACK / REACH DATUM: the maker's geometry diagram draws S (stack) as the vertical distance from the bottom bracket centre to a horizontal line through the top of the head tube and R (reach) as the horizontal distance from the BB centre to that same head-tube-top point, i.e. the usual frame stack/reach with no headset or cockpit included; the table simply says "Stack" and "Reach" with no code letter. TOP TUBE: printed as "N Top tube length" with no effective/actual wording; the diagram's top tube length B is drawn as a horizontal line from the head tube top to the seat post axis, so it is mapped to top_tube_effective (assumed). HEAD TUBE LENGTH is "L Head tube length". SIZE NAMES: XS, S, M, L, XL only; no cm equivalents printed; seat_tube_length is the table's "ST Seat tube length" (453/464/487/502/521). COLUMNS NOT IN THE SCHEMA: "G Fork length" = 370/370/370/370/370 (all sizes) and the maker's printed "Stack/Reach ratio" = 1.33/1.35/1.39/1.42/1.43 (XS to XL). "FC Front center" and "TRAIL" are printed by the maker (not derived here). DIAGRAM LETTERS DO NOT MATCH THE TABLE CODES: the diagram uses B/C/D/E/F/G/H/I/J/K/L/R/S (where F is the chainstay and G the front centre) while the table uses Q7/N/Q1/F/L/H/G/RC/FC/WB/ST (where F is fork offset and G is fork length); the diagram is a generic Pardus drawing, so only the table codes and labels were used for the mapping. CONSISTENCY: with the printed bb_drop, front_centre and chainstay, the horizontal wheelbase works out to 972.5 (XS), 976.8 (S), 980.1 (M), 989.2 (L), 1003.3 (XL) against the printed 977/978/980/990/1004, so the XS wheelbase is about 4-5 mm more than the other columns imply; recorded exactly as printed and flagged here, not corrected. Printed trail (65/56/58/58/58) is consistent with the printed head angles and fork offsets for a roughly 700x28 wheel. Nothing was taken from Panda Podium, Geometry Geeks, Bike Insights or 99 Spokes; no Panda Podium request was made for this file. Source: html_table (maker's site, "Geometry" tab is an HTML table, class nkcs-csv-table, next to a geometry diagram image https://pardusbicycle.com/wp-content/uploads/2026/05/ROBINEVO_Telaio_Geometrie_Trasparente-1024x770.png; the table is the source of every number, the diagram was read only for the datum conventions and was not stored)