Stack and reach
How high and how far forward the top of the head tube is, from the bottom bracket. They are the two numbers that decide whether a frame can be set up like yours.
BB, or bottom bracket
The axle your cranks turn on, in the middle of the frame. Every number on this site is measured from it, because it is the one point that sits in the same place on every bike.
Headset cover
The little cap on top of the head tube, under your spacers. Most makers do not publish it, so I assume 10 mm and add 6 mm to the band beside every answer.
Stem clamp, and its centre
The collar on the steerer that your stem bolts to. I need the middle of it. Where a maker gives only the height, I assume halfway up and say so on the answer.
Steerer
The tube coming up out of the fork. The cover, the spacers and the stem all sit on it, and it is the thing a mechanic cuts to length.
Bar reach
How far forward the hoods sit from the middle of the bar. Two bars on the same stem can put your hands 20 mm apart, which is why I ask.
Setback
How far your saddle sits behind the bottom bracket.
Drop
How much lower your hands sit than your saddle. On a riser bar I count the bar's rise, so the drop is that much less than it is to the clamp.
Rails, and the rail centre
The two rods under your saddle, and the middle of the straight part of them. That midpoint is the point I use, because it is the one you can find with a tape.
The band
How far out I could be, in millimetres, and why. It is a straight sum of everything I had to assume rather than a clever average, so it errs wide on purpose.
wb, stand, trail
Wheelbase, standover and trail: how long the bike is, how high the top tube is where you straddle it, and how steady the steering feels. I show them against your bike, and I leave them out when the maker does not publish them.
est.
Estimated: a number I worked out rather than read off the maker's table. Anything marked this way can move if the maker publishes the real one.
Close Escape closes it. The measuring guide has the pictures. Open the measuring guide
Rinasclta Aero Carbon Gravel
Gravel · 5 sizes
The Aero Carbon Gravel on rinascltabike.com
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Rinasclta Aero Carbon Gravel · Gravel · 5 sizes · integrated cockpit
- Geometry
- rinascltabike.com, fetched 21 Oct 2026, read off the maker's chart, re-checked, no differences
- Seat angle convention
- Calculated from Rinasclta's table
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 10 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 22 October 2026 · 879 bikes, 79 makes, 4,979 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The M drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Rinasclta AeroVendor-listedstem -10 · reach 77 · drop 127 · clamp 35 · lengths 80-120 · widths 360-440
Frame facts
not read off the maker's page yet: rinascltabike.com- Tyre clearance
- not recorded yet
- Bottom bracket
- not recorded yet
- Axles and brakes
- not recorded yet
- UDH
- not recorded yet
- Seatpost
- not recorded yet
- Frame weight
- not recorded yet
In the maker's words
Kept whole, as I read it off rinascltabike.com.The frameset includes an integrated handlebar.
Cockpit and seatpost, in the maker's words · 121 words
The frameset includes an integrated handlebar. (1) Rinasclta Aerodynamic Integrated Handlebar (one-piece bar and stem, OD1 28.6 mm steerer): stem angle -10 deg (drawn as 10 deg without a sign; the sign is assumed, not confirmed by the maker), stem lengths 80/90/100/110/120 mm, bar reach 77 mm, drop 127 mm, clamp height 35 mm, widths 360/380/400/420/440 mm (380-460 at the drops); https://rinascltabike.com/product/aero-integrated-handlebar/ (docs/research/cockpits/rinasclta-aero-integrated.json), as listed for the 2023 Grey Fade edition. (2) The older listing's Rinasclta gravel integrated handlebar (2021 chart): stem lengths 90/100/110/120 mm in the combinations 400 x 90/100, 420 x 110, 440 x 120; bar reach 80 mm; drop 125 mm; the maker prints no stem angle (docs/research/cockpits/rinasclta-gravel-integrated-2021.json). Stock stem and bar per size are not published (null).
SOURCE: rinascltabike.com is Rinasclta's own store (Xiamen carbon frame maker. Source: image_table (maker's own store, geometry chart image
How I read the maker's table
WordPress / WooCommerce). Geometry is an image in the product description: A BB center to top of seattube, B Effective top tube horizonta(l), C BB offset printed -67 (recorded as a 67 mm drop), D Chainstay length, E Seat angle, F Head angle, G Front center, H Head tube length, I Fork offset, J Reach, K Stack. No wheelbase printed (null). Rows not in the schema are named there. The same chart image is on the Grey Fade, Chameleon and plain listings of this frame (aero-gravel-frame-grey-fade, carbon-gravel-bike-frame-chameleon, carbon-gravel-bike-frame, carbon-gravel-bike-frame-set). Sizes listed as 49/52/54/56/58 cm against the chart's XS-XL. The frameset includes an integrated handlebar: the 2023 Grey Fade lists "Length: 360/380/400/420/440mm, Stem: 80/90/10..." (the Aerodynamic Integrated Handlebar, docs/research/cockpits/rinasclta-aero-integrated.json) and the older listing lists "400*90/100mm, 420*110mm, 440*120mm" (the 2021 gravel bar, docs/research/cockpits/rinasclta-gravel-integrated-2021.json). FLAG: the M front centre 600 repeats the S value. Front centre, trail and standover are given only where the chart prints them. STACK DATUM: not stated; head tube top assumed. MODEL YEAR: 2023, from the chart title or the listing. No Panda Podium, Geometry Geeks or 99 Spokes request was made; the site also hosts a geometry comparison tool with other brands' bikes, which was not used.
Source: image_table (maker's own store, geometry chart image https://rinascltabike.com/wp-content/uploads/2021/01/Rinasclta-gravel-frame-geometry.jpg, 1087x790 JPEG, read by eye)
