Stack and reach
How high and how far forward the top of the head tube is, from the bottom bracket. They are the two numbers that decide whether a frame can be set up like yours.
BB, or bottom bracket
The axle your cranks turn on, in the middle of the frame. Every number on this site is measured from it, because it is the one point that sits in the same place on every bike.
Headset cover
The little cap on top of the head tube, under your spacers. Most makers do not publish it, so I assume 15 mm and add 6 mm to the band, which on its own is enough to hold an answer at "probably" rather than "fits".
Stem clamp, and its centre
The collar on the steerer that your stem bolts to. I need the middle of it. Where a maker gives only the height, I assume halfway up and say so on the answer.
Steerer
The tube coming up out of the fork. The cover, the spacers and the stem all sit on it, and it is the thing a mechanic cuts to length.
Bar reach
How far forward the hoods sit from the middle of the bar. Two bars on the same stem can put your hands 20 mm apart, which is why I ask.
Setback
How far your saddle sits behind the bottom bracket.
Drop
How much lower your hands sit than your saddle. On a riser bar I count the bar's rise, so the drop is that much less than it is to the clamp.
Rails, and the rail centre
The two rods under your saddle, and the middle of the straight part of them. That midpoint is the point I use, because it is the one you can find with a tape.
The band
How far out I could be, in millimetres, and why. It is a straight sum of everything I had to assume rather than a clever average, so it errs wide on purpose.
wb, stand, trail
Wheelbase, standover and trail: how long the bike is, how high the top tube is where you straddle it, and how steady the steering feels. I show them against your bike, and I leave them out when the maker does not publish them.
est.
Estimated: a number I worked out rather than read off the maker's table. Anything marked this way can move if the maker publishes the real one.
Close Escape closes it. The measuring guide has the pictures. Open the measuring guide
LightCarbon LCG087-D
Gravel · 3 sizes
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- LightCarbon LCG087-D · Gravel · 3 sizes · integrated cockpit
- Geometry
- lightcarbon.com, fetched 20 Oct 2026, re-checked, no differences
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 15 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 22 October 2026 · 686 bikes, 74 makes, 3,984 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The M drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.LightCarbon HBR08Vendor-listedstem -7 · reach 82 · drop 125 · clamp 37 · lengths 90-120 · widths 380-440
Frame facts
read from the maker's words, not a table: lightcarbon.com- Tyre clearance
- not recorded yet
- Bottom bracket
- T47
- Axles and brakes
- 12x100 / 12x142, flat mount
- UDH
- yes
- Seatpost
- 31.6 mm round
- Frame weight
- not recorded yet
In the maker's words
Kept whole, as I read it off lightcarbon.com.The page's own specification table, verbatim: Frame: LightCarbon Gravel Carbon Frameset With Micro Suspension System; Material: High modulus Toray T700+T800 carbon fiber; Size: S, M, L; Fork: LightCarbon specific gravel carbon fork, 509g+/-15g; Handlebar HBR08 size: 380/400/420/440mm; Stem size: 90/100/110/120mm; Headtube: Straight 1 1/2'' head tube (upper 52mm lower 52mm); Weight(+-40g): 1450g/Small 1480g/Medium 1510g/Large; Seatpost: 31.6x400mm.
Cockpit and seatpost, in the maker's words · 141 words
The page's own specification table, verbatim: Frame: LightCarbon Gravel Carbon Frameset With Micro Suspension System; Material: High modulus Toray T700+T800 carbon fiber; Size: S, M, L; Fork: LightCarbon specific gravel carbon fork, 509g+/-15g; Handlebar HBR08 size: 380/400/420/440mm; Stem size: 90/100/110/120mm; Headtube: Straight 1 1/2'' head tube (upper 52mm lower 52mm); Weight(+-40g): 1450g/Small 1480g/Medium 1510g/Large; Seatpost: 31.6x400mm. Option 1: SP03 (0 offset, 207+/-10g). Option 2: SP02 (25mm offset, 193+/-10g); Bottom bracket: T47*P1.0 (85.5mm width); Max tire clearance: 700C*47C or 650B*1.95''; Max Chainring: If use 1x single chainring, max 40T, chainline 49.7mm If use 2x double chainring, max 48/31T (Shimano), chainline 44.5mm. If use 2x double chainring, max 43/30T (Sram), chainline 45mm.; Brake mount type: Flat mount front 140mm or 160mm, rear 160mm (brake caliper bolt length: 38.2mm); Dropout: Front 12*100mm TA Rear 12*142mm TA,; Hanger: UDH; Test standard: ISO4210; Warranty: 2 years.
SOURCE: www.lightcarbon.com is LightCarbon's own site (Xiamen LightCarbon Technology Co., Ltd). Source: html table (maker's own product page, a real HTML geometry table with named rows; parsed from the raw HTML, no image used)
How I read the maker's table
the product page "LightCarbon Gravel Frameset With Micro Suspension Downtube Storage Plus Handlebar" (item no. LCG087-D) publishes the geometry as a real HTML table with named rows, parsed from the raw HTML. The same table appears on: p245 (item no. LCG087S-D, https://www.lightcarbon.com/lightcarbon-gravel-frameset-with-micro-suspension-downtube-storage-plus-stem_p245.html, 200392 bytes): identical geometry rows. ROW MAPPING: REACH, STACK, WHEELBASE, CHAINSTAY LENGTH, FRONT CENTER, BB DROP, SEAT TUBE ANGLE, HEAD TUBE ANGLE, SEAT TUBE LENGTH, HEAD TUBE LENGTH, FORK RAKE/OFFSET and TRAIL map one to one; "TOP TUBE LENGTH, HORIZONTAL" is top_tube_effective; "BIKE STANDOVER HEIGHT(700C*47C)" is standover (the tyre the maker measured it with is in the row name). Rows not in the schema, kept here: Seatpost Insert Length 190mm / 220mm / 230mm; Bb Height 286mm / 286mm / 286mm; Fork Length, Full 396mm / 396mm / 396mm. Body-height bands are printed per size "for reference only". STACK DATUM: not stated; recorded as the usual head tube top. SIZE LABELS exactly as the geometry table heads its columns (S / M / L). HBR08 integrated gravel handlebar 380/400/420/440 mm with stems 90-120 mm on the LCG087-D; the LCG087S-D stem version prints the same table. Straight 1 1/2 in head tube (52/52 mm). Seatpost 31.6 x 400 mm, options SP03 0 mm offset or SP02 25 mm offset (recorded as posts 0 and 25). standover is measured with 700C x 47C tyres. SEAT ANGLE SEQUENCE, FLAGGED: the maker prints 74 / 74.5 / 73.5 deg for S / M / L; reach + stack / tan(angle) closes S exactly at 74 but gives 540.5 for M at 74.5 (printed top tube 545.7, which closes at 74) and 573.2 for L at 73.5 (printed 565.7, which would need about 74.2), so the M and L seat angles look like maker slips; kept as printed. MODEL YEAR: not printed; model_year null. No Panda Podium, Geometry Geeks or 99 Spokes request was made.