Stack and reach
How high and how far forward the top of the head tube is, from the bottom bracket. They are the two numbers that decide whether a frame can be set up like yours.
BB, or bottom bracket
The axle your cranks turn on, in the middle of the frame. Every number on this site is measured from it, because it is the one point that sits in the same place on every bike.
Headset cover
The little cap on top of the head tube, under your spacers. Most makers do not publish it, so I assume 15 mm and add 6 mm to the band, which on its own is enough to hold an answer at "probably" rather than "fits".
Stem clamp, and its centre
The collar on the steerer that your stem bolts to. I need the middle of it. Where a maker gives only the height, I assume halfway up and say so on the answer.
Steerer
The tube coming up out of the fork. The cover, the spacers and the stem all sit on it, and it is the thing a mechanic cuts to length.
Bar reach
How far forward the hoods sit from the middle of the bar. Two bars on the same stem can put your hands 20 mm apart, which is why I ask.
Setback
How far your saddle sits behind the bottom bracket.
Drop
How much lower your hands sit than your saddle. On a riser bar I count the bar's rise, so the drop is that much less than it is to the clamp.
Rails, and the rail centre
The two rods under your saddle, and the middle of the straight part of them. That midpoint is the point I use, because it is the one you can find with a tape.
The band
How far out I could be, in millimetres, and why. It is a straight sum of everything I had to assume rather than a clever average, so it errs wide on purpose.
wb, stand, trail
Wheelbase, standover and trail: how long the bike is, how high the top tube is where you straddle it, and how steady the steering feels. I show them against your bike, and I leave them out when the maker does not publish them.
est.
Estimated: a number I worked out rather than read off the maker's table. Anything marked this way can move if the maker publishes the real one.
Close Escape closes it. The measuring guide has the pictures. Open the measuring guide
Kona Rove DL and Rove LTD
Gravel · 6 sizes
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Kona Rove DL and Rove LTD · Gravel · 6 sizes
- Geometry
- konaworld.com, fetched 21 Oct 2026, re-checked, 9 corrected
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 15 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 22 October 2026 · 686 bikes, 74 makes, 3,984 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.| Size | Stack (mm) | Reach (mm) | Head angle (deg) | Seat angle (deg) | Head tube (mm) | Chainstay (mm) | Wheelbase (mm) | Standover (mm) |
|---|---|---|---|---|---|---|---|---|
| 48 | 532 | 372 | 70.5 | 75 | 90 | 435 | 1016 | 737 |
| 50 | 551 | 378 | 70.5 | 74.5 | 110 | 435 | 1029 | 755 |
| 52 | 570 | 383 | 71 | 74 | 130 | 435 | 1036 | 777 |
| 54 | 588 | 388 | 71 | 73.5 | 150 | 435 | 1048 | 807 |
| 56 | 607 | 392 | 71.5 | 73 | 170 | 435 | 1054 | 828 |
| 58 | 626 | 400 | 71.5 | 72.5 | 190 | 435 | 1068 | 847 |
The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The 54 drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Generic stem and barAssumedNo bar is listed for this frame.
Frame facts
not read off the maker's page yet: konaworld.com- Tyre clearance
- not recorded yet
- Bottom bracket
- not recorded yet
- Axles and brakes
- not recorded yet
- UDH
- not recorded yet
- Seatpost
- not recorded yet
- Frame weight
- not recorded yet
In the maker's words
Kept whole, as I read it off konaworld.com.Two-piece cockpit.
Cockpit and seatpost, in the maker's words · 67 words
Two-piece cockpit. The page's build table: HANDLEBAR "Kona Gravel Dropbar 31.8mm / Width 48 40cm / 50 42cm / 52 44cm / 54 46cm / 56-58 48cm"; STEM "Kona 31.8mm / Rise 6 deg / Length 48 60mm / 50 70mm / 52-54 80mm / 56-58 90mm". Stock stem and bar per size are given there as size ranges (not split into the size rows here, null).
SOURCE: konaworld.com is Kona's own store. Source: html table (maker's own store konaworld.com, the rove-dl-gy page's geometry table with numbered rows; parsed from the raw HTML)
How I read the maker's table
Rove DL complete bike page; the other Rove DL build, the Rove LTD Frame page and the Rove LTD complete bike page print the same frame and are the second readings. STANDOVER DISAGREES BETWEEN MAKER PAGES, FLAGGED: Rove DL 737/755/777/807/828/847, Rove LTD Frame 735/754/775/794/815/834, Rove LTD complete 749/767/789/807/828/847 (48-58); every other row agrees on all four pages. The standover here is from the Rove DL page. Rows not in the schema: BB Height 270 / 270 / 272 / 284 / 286 / 286; Fork Length 410 / 410 / 410 / 410 / 410 / 410. Build table: FRAME "Kona Butted Cromoly"; FORK "Kona Cromoly"; FRONT TIRE "Maxxis Rambler 48-52 650x47mm / 54-58 700x40mm". COMPARED BY SCRIPT with related Kona pages: https://konaworld.com/products/rove-37: 41 of 78 cells differ (48 stack 532 vs 536, 48 reach 372 vs 380, 48 head_tube_angle 70.5 vs 69.5, 48 top_tube_effective 515 vs 524, 48 wheelbase 1016 vs 1035, 48 standover 737 vs 749, 48 front_centre 592 vs 611, 50 stack 551 vs 555, 50 reach 378 vs 385, 50 head_tube_angle 70.5 vs 69.5, 50 top_tube_effective 531 vs 539, 50 wheelbase 1029 vs 1047, 50 standover 755 vs 769, 50 front_centre 604 vs 623, 52 stack 570 vs 573, 52 reach 383 vs 390, 52 head_tube_angle 71 vs 70, 52 top_tube_effective 546 vs 554, 52 wheelbase 1036 vs 1055, 52 standover 777 vs 790, 52 front_centre 612 vs 630, 54 stack 588 vs 592, 54 reach 388 vs 395, 54 head_tube_angle 71 vs 70, 54 top_tube_effective 562 vs 570, 54 wheelbase 1048 vs 1066, 54 standover 807 vs 809, 54 front_centre 623 vs 641, 56 stack 607 vs 609, 56 reach 392 vs 400, 56 head_tube_angle 71.5 vs 70, 56 top_tube_effective 578 vs 586, 56 wheelbase 1054 vs 1079, 56 standover 828 vs 829, 56 front_centre 628 vs 653, 58 stack 626 vs 628, 58 reach 400 vs 405, 58 head_tube_angle 71.5 vs 70, 58 top_tube_effective 598 vs 603, 58 wheelbase 1068 vs 1091). STACK DATUM: not stated; head tube top assumed. Trail not published unless a row says so. MODEL YEAR: not printed (null). No Panda Podium, Geometry Geeks or 99 Spokes request was made.