Stack and reach
How high and how far forward the top of the head tube is, from the bottom bracket. They are the two numbers that decide whether a frame can be set up like yours.
BB, or bottom bracket
The axle your cranks turn on, in the middle of the frame. Every number on this site is measured from it, because it is the one point that sits in the same place on every bike.
Headset cover
The little cap on top of the head tube, under your spacers. Most makers do not publish it, so I assume 15 mm and add 6 mm to the band, which on its own is enough to hold an answer at "probably" rather than "fits".
Stem clamp, and its centre
The collar on the steerer that your stem bolts to. I need the middle of it. Where a maker gives only the height, I assume halfway up and say so on the answer.
Steerer
The tube coming up out of the fork. The cover, the spacers and the stem all sit on it, and it is the thing a mechanic cuts to length.
Bar reach
How far forward the hoods sit from the middle of the bar. Two bars on the same stem can put your hands 20 mm apart, which is why I ask.
Setback
How far your saddle sits behind the bottom bracket.
Drop
How much lower your hands sit than your saddle. On a riser bar I count the bar's rise, so the drop is that much less than it is to the clamp.
Rails, and the rail centre
The two rods under your saddle, and the middle of the straight part of them. That midpoint is the point I use, because it is the one you can find with a tape.
The band
How far out I could be, in millimetres, and why. It is a straight sum of everything I had to assume rather than a clever average, so it errs wide on purpose.
wb, stand, trail
Wheelbase, standover and trail: how long the bike is, how high the top tube is where you straddle it, and how steady the steering feels. I show them against your bike, and I leave them out when the maker does not publish them.
est.
Estimated: a number I worked out rather than read off the maker's table. Anything marked this way can move if the maker publishes the real one.
Close Escape closes it. The measuring guide has the pictures. Open the measuring guide
ICAN TRA01
Road · 4 sizes
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- ICAN TRA01 · Road · 4 sizes
- Geometry
- icancycling.com, fetched 20 Oct 2026, re-checked, no differences
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 15 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 22 October 2026 · 686 bikes, 74 makes, 3,984 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The M drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Generic stem and barAssumedNo bar is listed for this frame.
Frame facts
read from the maker's words, not a table: icancycling.com- Tyre clearance
- not recorded yet
- Bottom bracket
- BSA
- Axles and brakes
- not recorded yet
- UDH
- not recorded yet
- Seatpost
- not recorded yet
- Frame weight
- 1404 g, size XS
In the maker's words
Kept whole, as I read it off icancycling.com.Frameset package (USD 870 at fetch time): "1X Carbon Track frame, 1X Carbon track fork, 1X Fitting headset, 1X Fitting Stem (Please leave message for us you need 95mm or 75mm size), 1X Fitting spacers"; no handlebar.
Cockpit and seatpost, in the maker's words · 78 words
Frameset package (USD 870 at fetch time): "1X Carbon Track frame, 1X Carbon track fork, 1X Fitting headset, 1X Fitting Stem (Please leave message for us you need 95mm or 75mm size), 1X Fitting spacers"; no handlebar. The fitting stem is offered in 75 or 95 mm; its angle and clamp height are not published. Headset 1-1/8", 1-1/2" (tapered). BB BSA. Frame weights XS 1404, S 1432, M 1461, L 1489 g (+/-40); fork AO-TRA01 370 +/-20 g.
SOURCE: icancycling.com is ICAN Cycling's own Shopify store (Xiamen). Source: image_table (maker's own Shopify store; the geometry is one image shown twice on the page, in the description
How I read the maker's table
TABLE LEGEND (from the drawing on the same image): S = seat tube, BB centre along the tube to the top of the seat tube; SC = seat angle; O = top tube, horizontal (top_tube_effective); HS = head tube; HC = head angle; F = fork length 368 every size (not a schema field); OT = fork offset 35; WB = wheelbase; FC = front centre, BB centre to front axle; RC = chainstay 380; G = BB drop 50; Stack drawn vertical from the BB centre and Reach horizontal from the BB centre's vertical, both to the head tube top. MAKER LABEL ERROR, FLAGGED: the table's last two columns are headed "Stack" then "Reach" but carry 381/396/413/428 and 487/502/516/531, which are the reach and the stack respectively. This file stores 487/502/516/531 as stack and 381/396/413/428 as reach, because (a) the drawing dimensions Stack vertically and Reach horizontally and only this way round does reach + stack / tan(SC) reproduce the printed top tube O (381 + 487 / tan 74.5 = 516.1 against O 516; 396 + 502 / tan 74.5 = 535.2 against 535; 556.1 against 556; 575.3 against 575), whereas the headers' way round gives 592.7 against 516; (b) a 95 mm head tube on a 368 mm fork at 73 deg cannot stand 381 mm tall; and (c) Bike Insights, citing this page, stores them the same way. The numbers themselves are unchanged; only the swapped header is not followed. XS head angle 73 deg against 74.5 on S-L, as printed. NOT PUBLISHED: standover, trail (null). MODEL YEAR: not printed (description image uploaded 2022-09, Shopify v=1663125260); model_year null. No Panda Podium, Geometry Geeks or 99 Spokes request was made.
Source: image_table (maker's own Shopify store; the geometry is one image shown twice on the page, in the description https://cdn.shopify.com/s/files/1/0871/7140/files/TRA01_geometry.png?v=1663125260 and in the gallery https://icancycling.com/cdn/shop/products/TRA01geometry.png?v=1736001857, both 1411x997 px, drawing + table headed "TRA01 frame data table (unit: length mm / angle deg)"; numbers read by eye, images NOT stored)
