Stack and reach
How high and how far forward the top of the head tube is, from the bottom bracket. They are the two numbers that decide whether a frame can be set up like yours.
BB, or bottom bracket
The axle your cranks turn on, in the middle of the frame. Every number on this site is measured from it, because it is the one point that sits in the same place on every bike.
Headset cover
The little cap on top of the head tube, under your spacers. Most makers do not publish it, so I assume 10 mm and add 6 mm to the band beside every answer.
Stem clamp, and its centre
The collar on the steerer that your stem bolts to. I need the middle of it. Where a maker gives only the height, I assume halfway up and say so on the answer.
Steerer
The tube coming up out of the fork. The cover, the spacers and the stem all sit on it, and it is the thing a mechanic cuts to length.
Bar reach
How far forward the hoods sit from the middle of the bar. Two bars on the same stem can put your hands 20 mm apart, which is why I ask.
Setback
How far your saddle sits behind the bottom bracket.
Drop
How much lower your hands sit than your saddle. On a riser bar I count the bar's rise, so the drop is that much less than it is to the clamp.
Rails, and the rail centre
The two rods under your saddle, and the middle of the straight part of them. That midpoint is the point I use, because it is the one you can find with a tape.
The band
How far out I could be, in millimetres, and why. It is a straight sum of everything I had to assume rather than a clever average, so it errs wide on purpose.
wb, stand, trail
Wheelbase, standover and trail: how long the bike is, how high the top tube is where you straddle it, and how steady the steering feels. I show them against your bike, and I leave them out when the maker does not publish them.
est.
Estimated: a number I worked out rather than read off the maker's table. Anything marked this way can move if the maker publishes the real one.
Close Escape closes it. The measuring guide has the pictures. Open the measuring guide
Gloria All Road
Endurance road · 6 sizes
The All Road on gloriacycling.com
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Gloria All Road · Endurance road · 6 sizes
- Versions
- Current, this table · 2024
- Geometry
- gloriacycling.com, fetched 21 Oct 2026, read off the maker's chart, re-checked, no differences
- Seat angle convention
- Calculated from Gloria's table
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 10 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 22 October 2026 · 879 bikes, 79 makes, 4,979 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.| Size | Stack (mm) | Reach (mm) | Head angle (deg) | Seat angle (deg) | Head tube (mm) | Chainstay (mm) | Wheelbase (mm) | Standover (mm)not published |
|---|---|---|---|---|---|---|---|---|
| 50 | 543.1 | 358.1 | 70 | 73.5 | 110 | 425 | 998 | |
| 52 | 562 | 366.5 | 71 | 73.5 | 126 | 425 | 1003 | |
| 54 | 580.9 | 374.9 | 72 | 73.5 | 142 | 425 | 1008 | |
| 56 | 600 | 382.3 | 72.5 | 73.5 | 160 | 425 | 1017 | |
| 58 | 619 | 390 | 72.5 | 73.5 | 180 | 425 | 1031 | |
| 60 | 636.6 | 399.5 | 72.5 | 73.5 | 198 | 425 | 1046.5 |
The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The 56 drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Generic stem and barAssumedNo bar is listed for this frame.
Frame facts
not read off the maker's page yet: gloriacycling.com- Tyre clearance
- not recorded yet
- Bottom bracket
- not recorded yet
- Axles and brakes
- not recorded yet
- UDH
- not recorded yet
- Seatpost
- not recorded yet
- Frame weight
- not recorded yet
In the maker's words
Kept whole, as I read it off gloriacycling.com.Two-piece cockpit.
Cockpit and seatpost, in the maker's words · 51 words
Two-piece cockpit. The frameset is sold with a carbon fork in four options (standard cable routing with or without cage mounts, or integrated hidden cables routed beneath the stem); Gloria sells its own titanium stem and Zipp Service Course bars separately. Stock stem and bar per size are not published (null).
SOURCE: gloriacycling.com is Gloria Cycling's own store (UK titanium maker, Crawley). Source: html table (maker's own store, the All Road Titanium frameset page's geometry table; parsed from the raw HTML; BB drop from the maker's geometry drawing image)
How I read the maker's table
The frameset page prints the geometry as an HTML table: Stack, Reach, Head Tube Angle, Seat Tube Angle, Effective Top Tube, Seat Tube C-T (seat_tube_length, centre to top), Head Tube, Chainstay, Wheelbase. Rows not in the schema: Down Tube Length 618.1 / 628.6 / 639 / 647.3 / 656 / 665.7; Fork Length 395 / 395 / 395 / 395 / 395 / 395. BB DROP: 72 on every size is printed only on the drawing image https://cdn.shopify.com/s/files/1/0800/6329/9868/files/All_road_2d_drawing_landscape_2__page-0001.jpg (4000x1359 JPEG on https://gloriacycling.com/pages/geometry), read by eye. DISCREPANCIES BETWEEN MAKER SOURCES, FLAGGED: the drawing image prints 54 reach 380.9, 58 DT length 656.7 and 60 seat tube C-T 580, where both HTML tables (frameset page and the frame-only page https://gloriacycling.com/products/frame-gloria-titanium-all-road) print 374.9, 656 and 588. The HTML 374.9 is kept: reach 374.9 plus stack 580.9 / tan 73.5 gives 547.0, the printed top tube, while 380.9 gives 553. The 60 seat tube is left at the HTML 588 (the image 580 cannot be checked from the other rows). ALL WORLD: the All World titanium frame (the same concept with a frame that separates for travel) prints the same geometry for 50-58 (https://gloriacycling.com/products/frameset-gloria-all-world-titanium-bike, 54 reach 374.9; its frame-only page prints 380.9 like the image); it is not a separate file. STACK DATUM: not stated; the drawing measures stack to the head tube top. The 2023 frame had a non-UDH hanger and frames from 2024 a UDH hanger (the store sells both hangers); the geometry is not dated, so model_year is null. Fork axle to crown 395 (all sizes). Fork offset, trail, standover and front centre are not published (null). No Panda Podium, Geometry Geeks or 99 Spokes request was made.
