est.
Estimated: a number I worked out rather than read off the maker's table. Anything marked this way can move if the maker publishes the real one.
BB, or bottom bracket
The axle your cranks turn on, in the middle of the frame. Every number on this site is measured from it, because it is the one point that sits in the same place on every bike.
Headset cover
The little cap on top of the head tube, under your spacers. Most makers do not publish it, so I assume 15 mm and add 6 mm to the band, which on its own is enough to hold an answer at "probably" rather than "fits".
Stem clamp, and its centre
The collar on the steerer that your stem bolts to. I need the middle of it. Where a maker gives only the height, I assume halfway up and say so on the answer.
Steerer
The tube coming up out of the fork. The cover, the spacers and the stem all sit on it, and it is the thing a mechanic cuts to length.
Bar reach
How far forward the hoods sit from the middle of the bar. Two bars on the same stem can put your hands 20 mm apart, which is why I ask.
Setback
How far your saddle sits behind the bottom bracket.
Drop
How much lower your bar is than your saddle.
Rails, and the rail centre
The two rods under your saddle, and the middle of the straight part of them. That midpoint is the point I use, because it is the one you can find with a tape.
Stack and reach
How high and how far forward the top of the head tube is, from the bottom bracket. They are the two numbers that decide whether a frame can be set up like yours.
The band
How far out I could be, in millimetres, and why. It is a straight sum of everything I had to assume rather than a clever average, so it errs wide on purpose.
wb, stand, trail
Wheelbase, standover and trail: how long the bike is, how high the top tube is where you straddle it, and how steady the steering feels. I show them against your bike, and I leave them out when the maker does not publish them.
Close Escape closes it. The measuring guide has the pictures. Open the measuring guide
Elves Avari Pro Disc
Road · 5 sizes
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Elves Avari Pro Disc · Road · 5 sizes · integrated cockpit
- Geometry
- store.elvesbike.com, fetched 29 Aug 2026, re-checked, no differences
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 15 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 6 September 2026 · 210 bikes, 43 makes, 1,262 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.| Size | Stack (mm) | Reach (mm) | Head angle (deg) | Seat angle (deg) | Head tube (mm) | Chainstay (mm) | Wheelbase (mm)not published | Standover (mm) |
|---|---|---|---|---|---|---|---|---|
| 40 | 504.7 | 365 | 70.5 | 75 | 90 | 410 | 688.7 | |
| 43 | 515.9 | 371 | 71 | 75 | 100 | 410 | 712.3 | |
| 46 | 543.9 | 378 | 72 | 74.5 | 130 | 410 | 751 | |
| 49 | 564.7 | 384 | 72.5 | 74 | 140 | 410 | 784.3 | |
| 52 | 574.2 | 390 | 72.5 | 74 | 155 | 410 | 810.6 |
The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The 46 drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm. A dashed tube is a number the maker left out (est.).
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Generic stem and barAssumedNo bar is listed for this frame.
In the maker's words
Kept whole, as I read it off store.elvesbike.com.Elves sells the frameset (frame, fork, seatpost, headset, three 10 mm integrated-handlebar spacers, cable-routing adapter for a regular stem, T47 bottom bracket of the buyer's choice) without a bar; the matching one-piece bar is the OROME AeroEvo integrated handlebar, sold separately or bundled, in widths 360/380/400/420 mm and stem lengths 90/100/110/120/130 mm (the Avari page: "360/380/400/420mm Widths, With Stem Lengths Covering 90/100/110/120/130mm"); its stem angle, reach, drop and stack height are not published on the frame pages.
Cockpit and seatpost, in the maker's words · 211 words
Elves sells the frameset (frame, fork, seatpost, headset, three 10 mm integrated-handlebar spacers, cable-routing adapter for a regular stem, T47 bottom bracket of the buyer's choice) without a bar; the matching one-piece bar is the OROME AeroEvo integrated handlebar, sold separately or bundled, in widths 360/380/400/420 mm and stem lengths 90/100/110/120/130 mm (the Avari page: "360/380/400/420mm Widths, With Stem Lengths Covering 90/100/110/120/130mm"); its stem angle, reach, drop and stack height are not published on the frame pages. Headset top-cover height and maximum spacer stack are not published (three 10 mm spacers are supplied). stock_stem_length / stock_bar_width null. Avari Pro Disc spec sheet image on the page (202402.jpg): frame Toray T800 + T1000, integrated seat clamp, 990 g size 43 unpainted without metal parts, headset 1-1/2 in x 8 mm lower and upper, flat mount, T47, Di2 and eTap compatible, EPS moulding, full internal routing, 12x142 rear, max tyre 700Cx30C; fork 392 g, offset 45 mm, steerer 300 mm; seatpost 350 or 400 mm, 189 g (12 mm offset) / 220 g (25 mm offset), 7x7 and 7x10 clamps (store option "12mm offset-straight seatpost"); sizes 40/43/46/49/52; UCI 44916. A size-guide image gives body heights 40: 145-158 cm, 43: 155-165, 46: 163-173, 49: 170-179, 52: 177-188 and the same standovers as the table.
SOURCE: the maker's own store page, Description tab, geometry as two images (drawing and table, no HTML table). Source: image_table (maker's own ueeshop store; the Description tab embeds the line drawing "AVARI PRO DISC GEOMETRY"
How I read the maker's table
every number was read from the table image (1980x806, sharp) by the collector. Wheelbase, front centre and trail are NOT in the Avari table (null), and the drawing's FKL / FC / WB / Offset labels have no table column; fork_offset 45 mm is taken from the spec sheet image on the same page ("OFFSET: 45mm", one value for all sizes) and is the only value in sizes[] not from the geometry table. The Avari Pro is Elves' small-rider frame ("Available in Sizes Starting from Size 40 ... A 3cm Dropped Toptube, And A Higher Stack Than Mainstream Frame Designs", full 700c wheels). ODDITY AS PRINTED: BB drop 72 on the 40 and 43, 68 on 46 to 52. Consistency check (mine, not published): the stack reproduces from HT, FL 385, offset 45, BB drop and HA within 1 mm on the 40 and 43 (40: 72 + 475 x sin 70.5 - 45 x cos 70.5 = 504.7 vs 504.7) and within 4 mm on 46-52 (49: 68 + 525 x sin 72.5 - 45 x cos 72.5 = 555.2 vs 564.7 is 9.5 mm off) - the larger sizes do not reproduce, as printed. MODEL YEAR: 2024 (the page: "The Elves Avari Pro 2024"; size guide image titled "AVARI 2024"). Category road. No aggregator consulted.
Source: image_table (maker's own ueeshop store; the Description tab embeds the line drawing "AVARI PRO DISC GEOMETRY" https://ueeshop.ly200-cdn.com/u_file/UPAU/UPAU610/2404/12/photo/202403.jpg and the table image https://ueeshop.ly200-cdn.com/u_file/UPAU/UPAU610/2404/12/photo/202404.jpg (1980x806, two stacked tables); numbers read from the table image by the collector, images NOT stored. fork_offset comes from the spec sheet image on the same page, not from the geometry table)
