Stack and reach
How high and how far forward the top of the head tube is, from the bottom bracket. They are the two numbers that decide whether a frame can be set up like yours.
BB, or bottom bracket
The axle your cranks turn on, in the middle of the frame. Every number on this site is measured from it, because it is the one point that sits in the same place on every bike.
Headset cover
The little cap on top of the head tube, under your spacers. Most makers do not publish it, so I assume 15 mm and add 6 mm to the band, which on its own is enough to hold an answer at "probably" rather than "fits".
Stem clamp, and its centre
The collar on the steerer that your stem bolts to. I need the middle of it. Where a maker gives only the height, I assume halfway up and say so on the answer.
Steerer
The tube coming up out of the fork. The cover, the spacers and the stem all sit on it, and it is the thing a mechanic cuts to length.
Bar reach
How far forward the hoods sit from the middle of the bar. Two bars on the same stem can put your hands 20 mm apart, which is why I ask.
Setback
How far your saddle sits behind the bottom bracket.
Drop
How much lower your hands sit than your saddle. On a riser bar I count the bar's rise, so the drop is that much less than it is to the clamp.
Rails, and the rail centre
The two rods under your saddle, and the middle of the straight part of them. That midpoint is the point I use, because it is the one you can find with a tape.
The band
How far out I could be, in millimetres, and why. It is a straight sum of everything I had to assume rather than a clever average, so it errs wide on purpose.
wb, stand, trail
Wheelbase, standover and trail: how long the bike is, how high the top tube is where you straddle it, and how steady the steering feels. I show them against your bike, and I leave them out when the maker does not publish them.
est.
Estimated: a number I worked out rather than read off the maker's table. Anything marked this way can move if the maker publishes the real one.
Close Escape closes it. The measuring guide has the pictures. Open the measuring guide
Cube Attain
Endurance road · 7 sizes
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Cube Attain · Endurance road · 7 sizes
- Geometry
- cube.eu, fetched 20 Oct 2026, re-checked, no differences
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 15 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 22 October 2026 · 686 bikes, 74 makes, 3,984 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.| Size | Stack (mm) | Reach (mm) | Head angle (deg) | Seat angle (deg) | Head tube (mm) | Chainstay (mm) | Wheelbase (mm) | Standover (mm) |
|---|---|---|---|---|---|---|---|---|
| 47 cm | 525 | 375 | 70.6 | 74.6 | 120 | 420 | 1000 | 709 |
| 50 cm | 538 | 378 | 71.5 | 74.6 | 130 | 420 | 1000 | 732 |
| 53 cm | 561 | 384 | 72 | 74 | 152 | 420 | 1008 | 759 |
| 56 cm | 591 | 391 | 72.5 | 73.5 | 182 | 420 | 1020 | 790 |
| 58 cm | 610 | 394 | 72.5 | 73 | 202 | 420 | 1020 | 808 |
| 60 cm | 630 | 396 | 72.5 | 72.5 | 222 | 420 | 1028 | 828 |
| 62 cm | 648 | 393 | 72.5 | 72.5 | 242 | 420 | 1036 | 848 |
The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The 56 cm drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Generic stem and barAssumedNo bar is listed for this frame.
Stock stem and bar per size47 cm 70 x 380, 50 cm 80 x 400, 53 cm 90 x 400, 56 cm 100 x 420, 58 cm 100 x 420, 60 cm 100 x 440, 62 cm 110 x 440 (stem length x bar width, mm)
Frame facts
read from the maker's words, not a table: cube.eu- Tyre clearance
- not recorded yet
- Bottom bracket
- not recorded yet
- Axles and brakes
- 12x142 rear, flat mount
- UDH
- not recorded yet
- Seatpost
- not recorded yet
- Frame weight
- not recorded yet
In the maker's words
Kept whole, as I read it off cube.eu.Two-piece on the Attain SLX: handlebar "Cube Compact Race Bar 31.8 5° 120 NF"; Ergonomics: stem angle -6 on every size; stem lengths 70/80/90/100/110 (70 on 47 cm, 80 on 50 cm, 90 on 53 cm, 100 on 56-60 cm, 110 on 62 cm); handlebar width 380/400/420/440 (380 on 47 cm, 400 on 50-53 cm, 420 on 56-58 cm, 440 on 60-62 cm).
Cockpit and seatpost, in the maker's words · 72 words
Two-piece on the Attain SLX: handlebar "Cube Compact Race Bar 31.8 5° 120 NF"; Ergonomics: stem angle -6 on every size; stem lengths 70/80/90/100/110 (70 on 47 cm, 80 on 50 cm, 90 on 53 cm, 100 on 56-60 cm, 110 on 62 cm); handlebar width 380/400/420/440 (380 on 47 cm, 400 on 50-53 cm, 420 on 56-58 cm, 440 on 60-62 cm). Seat post "CUBE Performance Post, 27.2mm" (offset not printed).
OFFICIAL SOURCE: https://www.cube.eu/cube-attain-slx-black-n-chrome/1130600. Source: html table (official Cube product page for the Attain SLX, Geometry tab table e-geometry-integration-table; fetched 2026-10-20
How I read the maker's table
Cube prints no fork offset, trail or front centre (null), and no stack datum in words (stack_datum null). Angles print with a degree sign and up to one decimal, lengths in mm. The page's Ergonomics table (same sizes) gives per size: Stem length, Angle stem, Handlebar width, Crank length, Length seat post, Diameter tire maximum, Width tire maximum; stock_stem_length and stock_bar_width come from it for the build named in source_url. No model year is printed on the page (Bike Insights files this table under the version named in cross_check). Cube files this frame under ROAD > ROAD RACE > ATTAIN > Attain HPA; the range line reads "ATTAIN | Comfort and fun - the perfect start to road cycling adventures", hence road endurance. Frame "Aluminium 6061 T4/T6 Superlite, Road Comfort Geometry, Integrated Cable Routing, Flat Mount Disc, Integrated Seatpost Clamp, 12x142mm, AXH". Differs from the Attain C:62 table in head angle (50 cm 71.5 vs 71.1), wheelbase, standover and reach. REACH STEPS BACK: the 62 cm prints reach 393 below the 60 cm's 396, as printed. Stock tyre "Continental Grand Prix TR, Kevlar, 32-622" (tyre_width_mm 32); "Width tire maximum 33". Other Attain builds (PRO, RACE) share the frame.
Source: html table (official Cube product page for the Attain SLX, Geometry tab table e-geometry-integration-table; fetched 2026-10-20, HTTP 200)