Stack and reach
How high and how far forward the top of the head tube is, from the bottom bracket. They are the two numbers that decide whether a frame can be set up like yours.
BB, or bottom bracket
The axle your cranks turn on, in the middle of the frame. Every number on this site is measured from it, because it is the one point that sits in the same place on every bike.
Headset cover
The little cap on top of the head tube, under your spacers. Most makers do not publish it, so I assume 10 mm and add 6 mm to the band beside every answer.
Stem clamp, and its centre
The collar on the steerer that your stem bolts to. I need the middle of it. Where a maker gives only the height, I assume halfway up and say so on the answer.
Steerer
The tube coming up out of the fork. The cover, the spacers and the stem all sit on it, and it is the thing a mechanic cuts to length.
Bar reach
How far forward the hoods sit from the middle of the bar. Two bars on the same stem can put your hands 20 mm apart, which is why I ask.
Setback
How far your saddle sits behind the bottom bracket.
Drop
How much lower your hands sit than your saddle. On a riser bar I count the bar's rise, so the drop is that much less than it is to the clamp.
Rails, and the rail centre
The two rods under your saddle, and the middle of the straight part of them. That midpoint is the point I use, because it is the one you can find with a tape.
The band
How far out I could be, in millimetres, and why. It is a straight sum of everything I had to assume rather than a clever average, so it errs wide on purpose.
wb, stand, trail
Wheelbase, standover and trail: how long the bike is, how high the top tube is where you straddle it, and how steady the steering feels. I show them against your bike, and I leave them out when the maker does not publish them.
est.
Estimated: a number I worked out rather than read off the maker's table. Anything marked this way can move if the maker publishes the real one.
Close Escape closes it. The measuring guide has the pictures. Open the measuring guide
Cube Agree C:62
Endurance road · 7 sizes
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Cube Agree C:62 · Endurance road · 7 sizes · integrated cockpit
- Geometry
- cube.eu, fetched 20 Oct 2026, re-checked, no differences
- Seat angle convention
- Calculated from Cube's table
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 10 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 22 October 2026 · 879 bikes, 79 makes, 4,979 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.| Size | Stack (mm) | Reach (mm) | Head angle (deg) | Seat angle (deg) | Head tube (mm) | Chainstay (mm) | Wheelbase (mm) | Standover (mm) |
|---|---|---|---|---|---|---|---|---|
| 47 cm | 513 | 376 | 71 | 74.6 | 112 | 412 | 986 | 717 |
| 50 cm | 523 | 378 | 71.5 | 74.6 | 120 | 412 | 987 | 734 |
| 53 cm | 544 | 383 | 72 | 74 | 140 | 412 | 994 | 764 |
| 56 cm | 572 | 391 | 72.5 | 73.5 | 170 | 412 | 1007 | 794 |
| 58 cm | 591 | 394 | 72.5 | 73 | 190 | 412 | 1017 | 813 |
| 60 cm | 606 | 399 | 72.5 | 72.5 | 208 | 412 | 1027 | 833 |
| 62 cm | 628 | 402 | 72.5 | 72.5 | 231 | 412 | 1037 | 852 |
The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The 56 cm drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Cube Basebar-Stem Litening AirVendor-listedstem -6 · reach 74 · drop 128 · clamp 31 · lengths 90-120 · widths 380-440
Cube Basebar-Stem Litening IC AeroVendor-listedstem -10 · reach 72 · drop 125 · clamp 35 · lengths 90-120 · widths 380-420
Stock stem and bar per size47 cm 90 x 380, 50 cm 90 x 380, 53 cm 100 x 400, 56 cm 100 x 400, 58 cm 110 x 420, 60 cm 110 x 420, 62 cm 120 x 420 (stem length x bar width, mm)
Frame facts
read from the maker's words, not a table: cube.eu- Tyre clearance
- not recorded yet
- Bottom bracket
- not recorded yet
- Axles and brakes
- 12x142 rear, flat mount
- UDH
- yes
- Seatpost
- not recorded yet
- Frame weight
- not recorded yet
In the maker's words
Kept whole, as I read it off cube.eu.(1) IC Aero Cockpit System (stock on the Agree C:62 SLX: "IC Aero Cockpit System, Integrated Cable Routing, Aero Spacer System, Garmin Mount Interface"): stem angle -10 (Ergonomics "Angle stem -10" on every size); stem lengths 90/100/110/120 (90 on 47-50 cm, 100 on 53-56 cm, 110 on 58-60 cm, 120 on 62 cm); handlebar width 380/400/420 (380 on 47-50 cm, 400 on 53-56 cm, 420 on 58-62 cm).
Cockpit and seatpost, in the maker's words · 174 words
(1) IC Aero Cockpit System (stock on the Agree C:62 SLX: "IC Aero Cockpit System, Integrated Cable Routing, Aero Spacer System, Garmin Mount Interface"): stem angle -10 (Ergonomics "Angle stem -10" on every size); stem lengths 90/100/110/120 (90 on 47-50 cm, 100 on 53-56 cm, 110 on 58-60 cm, 120 on 62 cm); handlebar width 380/400/420 (380 on 47-50 cm, 400 on 53-56 cm, 420 on 58-62 cm). No reach or drop on the bike page. (2) Cube sells the Basebar-Stem-Combination Litening IC Aero (https://www.cube.eu/cube-basebar-stem-combination-litening-ic-aero/10263) as "Kompatibel mit CUBE Litening Air / Agree / Cross Race": stem angle -10; stem lengths 90/100/110/120; widths 380/400/420; bar reach 72 mm; drop 125 mm; flare 6 deg; clamp height 35 mm. (3) and the Basebar-Stem-Combination Litening Air / Agree / Cross Race (https://www.cube.eu/cube-basebar-stem-combination-litening-air-agree-cross-race/12827): stem angle -6; stem lengths 90/100/110/120; widths 380/400/420/440; bar reach 74 mm; drop 128 mm; clamp height 31 mm. Seat post "Agree C:62 Aero, Comfort Flex" (offset not printed); Cube also lists "CUBE Seatpost Agree Setback" and "CUBE Seatpost Agree Zero" as spare parts.
OFFICIAL SOURCE: https://www.cube.eu/cube-agree-c-62-slx-slategrey-n-chrome/1132600. Source: html table (official Cube product page for the Agree C:62 SLX, Geometry tab table e-geometry-integration-table; fetched 2026-10-20
How I read the maker's table
Cube prints no fork offset, trail or front centre (null), and no stack datum in words (stack_datum null). Angles print with a degree sign and up to one decimal, lengths in mm. The page's Ergonomics table (same sizes) gives per size: Stem length, Angle stem, Handlebar width, Crank length, Length seat post, Diameter tire maximum, Width tire maximum; stock_stem_length and stock_bar_width come from it for the build named in source_url. No model year is printed on the page (Bike Insights files this table under the version named in cross_check). MAKER'S WORDS for the range: "AGREE | Efficiency for long distances, endurance training and first races" (Cube's road menu), hence road endurance. Frame "C:62 Advanced Twin Mold Technology, Full Internal Cable Routing, Integrated Seat Post Clamp, Flat Mount Disc, Storage Box Option, AXH, 12x142mm, UDH"; headset "Acros, Top Integrated 1 1/2" w/ Integrated Cable Routing, Bottom Integrated 1 1/4"". Stock tyre "Continental Grand Prix 5000 S-TR, Kevlar, 30-622" (tyre_width_mm 30); Ergonomics prints "Width tire maximum 36". Other Agree C:62 builds (ONE, EX, PRO, RACE, SLT Di2, SLT AXS) share the frame; their stems and bars may differ from the SLX recorded here.
Source: html table (official Cube product page for the Agree C:62 SLX, Geometry tab table e-geometry-integration-table; fetched 2026-10-20, HTTP 200)