Stack and reach
How high and how far forward the top of the head tube is, from the bottom bracket. They are the two numbers that decide whether a frame can be set up like yours.
BB, or bottom bracket
The axle your cranks turn on, in the middle of the frame. Every number on this site is measured from it, because it is the one point that sits in the same place on every bike.
Headset cover
The little cap on top of the head tube, under your spacers. Most makers do not publish it, so I assume 10 mm and add 6 mm to the band beside every answer.
Stem clamp, and its centre
The collar on the steerer that your stem bolts to. I need the middle of it. Where a maker gives only the height, I assume halfway up and say so on the answer.
Steerer
The tube coming up out of the fork. The cover, the spacers and the stem all sit on it, and it is the thing a mechanic cuts to length.
Bar reach
How far forward the hoods sit from the middle of the bar. Two bars on the same stem can put your hands 20 mm apart, which is why I ask.
Setback
How far your saddle sits behind the bottom bracket.
Drop
How much lower your hands sit than your saddle. On a riser bar I count the bar's rise, so the drop is that much less than it is to the clamp.
Rails, and the rail centre
The two rods under your saddle, and the middle of the straight part of them. That midpoint is the point I use, because it is the one you can find with a tape.
The band
How far out I could be, in millimetres, and why. It is a straight sum of everything I had to assume rather than a clever average, so it errs wide on purpose.
wb, stand, trail
Wheelbase, standover and trail: how long the bike is, how high the top tube is where you straddle it, and how steady the steering feels. I show them against your bike, and I leave them out when the maker does not publish them.
est.
Estimated: a number I worked out rather than read off the maker's table. Anything marked this way can move if the maker publishes the real one.
Close Escape closes it. The measuring guide has the pictures. Open the measuring guide
Canyon Grizl AL WMN
Gravel · 5 sizes
The Grizl AL WMN on canyon.com
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Canyon Grizl AL WMN · Gravel · 5 sizes
- Geometry
- canyon.com, fetched 22 Oct 2026, re-checked, no differences
- Seat angle convention
- Calculated from Canyon's table
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 10 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 22 October 2026 · 879 bikes, 79 makes, 4,979 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.| Size | Stack (mm) | Reach (mm) | Head angle (deg) | Seat angle (deg) | Head tube (mm) | Chainstay (mm) | Wheelbase (mm) | Standover (mm) |
|---|---|---|---|---|---|---|---|---|
| 3XS | 512 | 372 | 69 | 73.5 | 115 | 420 | 1007 | 709 |
| 2XS | 522 | 377 | 69.75 | 73.5 | 122 | 420 | 1009 | 730 |
| XS | 537 | 382 | 70.5 | 73.5 | 135 | 420 | 1012 | 752 |
| S | 556 | 397 | 70.25 | 73.5 | 121 | 435 | 1044 | 780 |
| M | 579 | 402 | 71.5 | 73.5 | 141 | 435 | 1045 | 807 |
The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The XS drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Generic stem and barAssumedNo bar is listed for this frame.
Stock stem and bar per size3XS 70 x 380, 2XS 70 x 400, XS 80 x 400, S 80 x 420, M 80 x 420 (stem length x bar width, mm)
Frame facts
read off the maker's page: canyon.com- Tyre clearance
- 54 mm front, 50 mm rear
- Bottom bracket
- not published
- Axles and brakes
- not published
- UDH
- not published
- Seatpost
- 27.2 mm round
- Frame weight
- not published
In the maker's words
Kept whole, as I read it off canyon.com.Grizl 6 WMN (MY2021), Canyon GB product page (https://www.canyon.com/en-gb/grizl-6-wmn/2702.html): Stem "Canyon V13", Handlebar "Canyon HB 0050 Ergobar AL", Seatpost "Canyon SP0057 VCLS", Fork "Canyon FK0087 CF Disc".
Cockpit and seatpost, in the maker's words · 53 words
Grizl 6 WMN (MY2021), Canyon GB product page (https://www.canyon.com/en-gb/grizl-6-wmn/2702.html): Stem "Canyon V13", Handlebar "Canyon HB 0050 Ergobar AL", Seatpost "Canyon SP0057 VCLS", Fork "Canyon FK0087 CF Disc". The geometry page prints stem lengths 70/70/80/80/80 mm and bar widths 380/400/400/420/420 mm (3XS to M) and a 27,5 mm spacer; no stem angle is printed.
OFFICIAL SOURCE: Canyon GB printable geometry page for the Grizl 6 WMN (pid 2702. Source: html table (official Canyon GB "Geometry & dimensions" page
How I read the maker's table
product page frame "Canyon Grizl AL", JSON-LD Year 2021), 5 sizes 3XS-M. Canyon's women's Grizl: five sizes 3XS to M on the Grizl AL frame, a different table from the unisex Grizl AL (canyon-grizl-al.json: its 2XS stack is 550 against 522 here). 27.5 in wheels on 3XS, 2XS and XS (a 420 mm chainstay and 60 mm BB drop), 28 in on S and M (435 and 75). Decimal commas and thousand points converted by script. Fork offset, trail and front centre are not published (null); the stack datum is not stated (null). Per-size wheel_size: 650b on 3XS, 2XS and XS, 700c on S and M, as Canyon's Wheel Size row prints (27.5" and 28").
Source: html table (official Canyon GB "Geometry & dimensions" page, https://www.canyon.com/en-gb/productpdf/geometry/?pid=2702, the printable HTML Canyon still serves for the archived Grizl 6 WMN; fetched 2026-10-22, HTTP 200)