Stack and reach
How high and how far forward the top of the head tube is, from the bottom bracket. They are the two numbers that decide whether a frame can be set up like yours.
BB, or bottom bracket
The axle your cranks turn on, in the middle of the frame. Every number on this site is measured from it, because it is the one point that sits in the same place on every bike.
Headset cover
The little cap on top of the head tube, under your spacers. Most makers do not publish it, so I assume 10 mm and add 6 mm to the band beside every answer.
Stem clamp, and its centre
The collar on the steerer that your stem bolts to. I need the middle of it. Where a maker gives only the height, I assume halfway up and say so on the answer.
Steerer
The tube coming up out of the fork. The cover, the spacers and the stem all sit on it, and it is the thing a mechanic cuts to length.
Bar reach
How far forward the hoods sit from the middle of the bar. Two bars on the same stem can put your hands 20 mm apart, which is why I ask.
Setback
How far your saddle sits behind the bottom bracket.
Drop
How much lower your hands sit than your saddle. On a riser bar I count the bar's rise, so the drop is that much less than it is to the clamp.
Rails, and the rail centre
The two rods under your saddle, and the middle of the straight part of them. That midpoint is the point I use, because it is the one you can find with a tape.
The band
How far out I could be, in millimetres, and why. It is a straight sum of everything I had to assume rather than a clever average, so it errs wide on purpose.
wb, stand, trail
Wheelbase, standover and trail: how long the bike is, how high the top tube is where you straddle it, and how steady the steering feels. I show them against your bike, and I leave them out when the maker does not publish them.
est.
Estimated: a number I worked out rather than read off the maker's table. Anything marked this way can move if the maker publishes the real one.
Close Escape closes it. The measuring guide has the pictures. Open the measuring guide
Canyon Endurace AL Disc
Endurance road · 8 sizes
The Endurace AL Disc on canyon.com
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Canyon Endurace AL Disc · Endurance road · 8 sizes
- Geometry
- canyon.com, fetched 22 Oct 2026, re-checked, no differences
- Seat angle convention
- Calculated from Canyon's table
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 10 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 22 October 2026 · 879 bikes, 79 makes, 4,979 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.| Size | Stack (mm) | Reach (mm) | Head angle (deg) | Seat angle (deg) | Head tube (mm) | Chainstay (mm) | Wheelbase (mm) | Standover (mm) |
|---|---|---|---|---|---|---|---|---|
| 3XS | 510 | 350 | 70.5 | 73.5 | 122 | 405 | 957 | 681 |
| 2XS | 529 | 354 | 71.5 | 73.5 | 139 | 405 | 958 | 691 |
| XS | 548 | 370 | 71 | 73.5 | 128 | 415 | 989 | 744 |
| S | 568 | 375 | 72 | 73.5 | 145 | 415 | 991 | 774 |
| M | 590 | 378 | 73 | 73.5 | 164 | 415 | 990 | 800 |
| L | 611 | 387 | 73 | 73.5 | 186 | 415 | 1006 | 827 |
| XL | 637 | 405 | 73.25 | 73.5 | 213 | 415 | 1029 | 852 |
| 2XL | 656 | 414 | 73.25 | 73.5 | 232 | 415 | 1044 | 878 |
The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The M drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Generic stem and barAssumedNo bar is listed for this frame.
Stock stem and bar per size3XS 70 x 380, 2XS 80 x 380, XS 80 x 400, S 90 x 420, M 100 x 420, L 110 x 440, XL 110 x 440, 2XL 120 x 440 (stem length x bar width, mm)
Frame facts
read off the maker's page: canyon.com- Tyre clearance
- 36 mm
- Bottom bracket
- not published
- Axles and brakes
- not published
- UDH
- not published
- Seatpost
- 27.2 mm round
- Frame weight
- not published
In the maker's words
Kept whole, as I read it off canyon.com.Endurace 7 RAW (MY2024), Canyon GB archive page (https://www.canyon.com/en-gb/archive/endurace-7-raw/3705.html): Stem "Canyon ST0035", Handlebar "Canyon H17 Ergobar AL", Seatpost "Canyon SP0056", Fork "Canyon FK0089 CF Disc".
Cockpit and seatpost, in the maker's words · 68 words
Endurace 7 RAW (MY2024), Canyon GB archive page (https://www.canyon.com/en-gb/archive/endurace-7-raw/3705.html): Stem "Canyon ST0035", Handlebar "Canyon H17 Ergobar AL", Seatpost "Canyon SP0056", Fork "Canyon FK0089 CF Disc". The Endurace 6 of MY2022 (pid 2732) ships Stem "Canyon V13" and the same bar and fork. The geometry page prints stem lengths 70/80/80/90/100/110/110/120 mm and bar widths 380/380/400/420/420/440/440/440 mm (3XS to 2XL) and a 27,5 mm spacer; no stem angle is printed.
OFFICIAL SOURCE: Canyon GB printable geometry page for the Endurace 7 RAW (pid 3705. Source: html table (official Canyon GB "Geometry & dimensions" page
How I read the maker's table
product page frame "Canyon Endurace AL Disc", JSON-LD Year 2024), 8 sizes 3XS-2XL. The disc-brake aluminium Endurace. The Endurace 6 of MY2022 (pid 2732, JSON-LD Year 2022) and the Endurace 7 (pid 2733) print this table cell for cell (0 of 88 cells differ), so it ran MY2022 to MY2024; Bike Insights also files it under 2024 and 2025. A different table from the rim-brake Endurace AL of MY2021 (canyon-endurace-al-2021.json). 27.5 in wheels on 3XS and 2XS (405 mm chainstays, 60 mm BB drop), 28 in from XS. As printed, the wheelbase is 991 on S and 990 on M. Stock tyres Schwalbe One, 30mm and 32mm (two lines on the product page). Decimal commas and thousand points converted by script. Fork offset, trail and front centre are not published (null); the stack datum is not stated (null). Per-size wheel_size: 650b on 3XS and 2XS, 700c from XS, as Canyon's Wheel Size row prints (27.5" and 28").
Source: html table (official Canyon GB "Geometry & dimensions" page, https://www.canyon.com/en-gb/productpdf/geometry/?pid=3705, the printable HTML Canyon still serves for the archived Endurace 7 RAW; fetched 2026-10-22, HTTP 200)