Stack and reach
How high and how far forward the top of the head tube is, from the bottom bracket. They are the two numbers that decide whether a frame can be set up like yours.
BB, or bottom bracket
The axle your cranks turn on, in the middle of the frame. Every number on this site is measured from it, because it is the one point that sits in the same place on every bike.
Headset cover
The little cap on top of the head tube, under your spacers. Most makers do not publish it, so I assume 15 mm and add 6 mm to the band, which on its own is enough to hold an answer at "probably" rather than "fits".
Stem clamp, and its centre
The collar on the steerer that your stem bolts to. I need the middle of it. Where a maker gives only the height, I assume halfway up and say so on the answer.
Steerer
The tube coming up out of the fork. The cover, the spacers and the stem all sit on it, and it is the thing a mechanic cuts to length.
Bar reach
How far forward the hoods sit from the middle of the bar. Two bars on the same stem can put your hands 20 mm apart, which is why I ask.
Setback
How far your saddle sits behind the bottom bracket.
Drop
How much lower your hands sit than your saddle. On a riser bar I count the bar's rise, so the drop is that much less than it is to the clamp.
Rails, and the rail centre
The two rods under your saddle, and the middle of the straight part of them. That midpoint is the point I use, because it is the one you can find with a tape.
The band
How far out I could be, in millimetres, and why. It is a straight sum of everything I had to assume rather than a clever average, so it errs wide on purpose.
wb, stand, trail
Wheelbase, standover and trail: how long the bike is, how high the top tube is where you straddle it, and how steady the steering feels. I show them against your bike, and I leave them out when the maker does not publish them.
est.
Estimated: a number I worked out rather than read off the maker's table. Anything marked this way can move if the maker publishes the real one.
Close Escape closes it. The measuring guide has the pictures. Open the measuring guide
Airwolf YFR031
Road · 5 sizes
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Airwolf YFR031 · Road · 5 sizes
- Geometry
- airwolfcarbonbike.com, fetched 21 Oct 2026, re-checked, no differences
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 15 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 22 October 2026 · 686 bikes, 74 makes, 3,984 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The 52 drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Generic stem and barAssumedNo bar is listed for this frame.
Frame facts
read from the maker's words, not a table: airwolfcarbonbike.com- Tyre clearance
- not recorded yet
- Bottom bracket
- T47
- Axles and brakes
- not recorded yet
- UDH
- not recorded yet
- Seatpost
- not recorded yet
- Frame weight
- not recorded yet
In the maker's words
Kept whole, as I read it off airwolfcarbonbike.com.Two-piece cockpit (frameset only).
Cockpit and seatpost, in the maker's words · 14 words
Two-piece cockpit (frameset only). Stock stem and bar per size are not published (null).
SOURCE: airwolfcarbonbike.com is the Airwolf store (Shenzhen. Source: image_table (the Airwolf store airwolfcarbonbike.com, size-chart image in the product description
How I read the maker's table
WordPress / WooCommerce; the brand also sells through AliExpress, which was not used). The geometry is a size-chart image in the product description. Columns, named: A SEAT TUBE ANGLE, B HEAD TUBE ANGLE, C BB center to top, D Chainstay lenght printed "395-420" on every size (track ends; the short end 395 recorded), E BB offset 58 (BB drop), F Head tube lenght, G Effective top tube horizont(al), H Stack, I Reach, J Fork lenght 378 every size (not in the schema), K Fork offset, L Wheelbase, M Front center. Track frame: T47; tyres to 700 x 30C. The wheelbase sits about 2 mm past the 395 mm chainstay end (FC plus the horizontal chainstay), so the printed wheelbase is for a near-forward wheel position. Trail and standover are given only where the chart prints them. STACK DATUM: not stated; head tube top assumed. MODEL YEAR: not printed (null). No Panda Podium, Geometry Geeks or 99 Spokes request was made.
Source: image_table (the Airwolf store airwolfcarbonbike.com, size-chart image in the product description https://airwolfcarbonbike.com/wp-content/uploads/2026/04/Carbon-Fixie-Frame-.jpg, 1000x1130 JPG, read by eye)
