Skip to content
BikeTwins
How it works

Pinarello Grevil F

Gravel · 6 sizes

Sign in and add the bike you ride, and this table will say what each size needs for your position. Sign in This is the bike I ride
Bike
Pinarello Grevil F · Gravel · 6 sizes
Versions
Current, this table · 2023
Geometry
pinarello.com, fetched 20 Oct 2026, re-checked, no differences
Cockpit
Generic stem and bar, assumed
Solved with
cover 15 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
Sheet
22 October 2026 · 686 bikes, 74 makes, 3,984 sizes in the catalogue

Geometry, every size, from the maker's table

The tinted row is the size drawn beside it. Press a size to draw it.
Size Stack (mm) Reach (mm) Head angle (deg) Seat angle (deg) Head tube (mm) Chainstay (mm) Wheelbase (mm) Standover (mm)not published
47 553.2 368.4 70.25 74.5 115 430 1023.5
50 568.3 376.1 70.5 74 130 430 1034.2
53 583.2 383.7 70.75 73.75 150 430 1047
55 598.4 390.4 71.75 73.5 160 430 1043
57.5 613.6 398.2 72 73 175 430 1053.1
60 633.7 406.9 72.25 72.5 195 430 1065.5

The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.

Seat tube 490 mmHead tube 160 mmTop tube 570 mmDown tubeChainstay 430 mmSeat stayFork 1043 mm stack 598reach 390Head tube top 390 / 598BB 0 / 0

The 55 drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.

The maker's cockpit

No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.
Generic stem and barAssumedNo bar is listed for this frame.

Frame facts

not read off the maker's page yet: pinarello.com
Tyre clearance
not recorded yet
Bottom bracket
not recorded yet
Axles and brakes
not recorded yet
UDH
not recorded yet
Seatpost
not recorded yet
Frame weight
not recorded yet

In the maker's words

Kept whole, as I read it off pinarello.com.
Two-piece on every build: F9 and F7 "HANDLEBAR: JAGUAR ULTRA GR TICR", F5, F3 and F1 "HANDLEBAR: JAGUAR XA GR TICR"; every build "STEM: TIGER ALU AERO TICR".
Cockpit and seatpost, in the maker's words · 32 words
Two-piece on every build: F9 and F7 "HANDLEBAR: JAGUAR ULTRA GR TICR", F5, F3 and F1 "HANDLEBAR: JAGUAR XA GR TICR"; every build "STEM: TIGER ALU AERO TICR". No integrated cockpit listed.
OFFICIAL SOURCE: Pinarello product page NEW GREVIL F9 SRAM RED XPLR AXS (https://pinarello.com/global/en/bikes/gravel/competition/new-grevil-f/new-grevil-f9-sram-red-xplr-axs-1x13). Source: html table (official Pinarello global English product page "NEW GREVIL F9 SRAM RED XPLR AXS", section "Geometries": the table in the page markup; fetched 2026-10-20
How I read the maker's table
The table has NO size column: Pinarello names a frame size by its seat tube centre-to-centre length in cm (the Dogma F page's weight line reads "Weight in size 53"; the CC column prints 530 on that row), so size_label is the CC column written in cm (CC 430 -> "43", 465 -> "46.5"); nothing else is derived. Column mapping: CE (seat tube centre to end) -> seat_tube_length; CC (centre to centre) -> size label; L -> top_tube_effective; A -> seat_tube_angle; B -> head_tube_angle; P -> chainstay; T -> head_tube_length; D -> bb_drop; R (fork rake) -> fork_offset; G (fork height, axle to crown) not in the schema; REACH -> reach; STACK -> stack. The legend beside the table reads "CE: SEAT TUBE CENTER - END, CC: SEAT TUBE CENTER - CENTER, L: TOP TUBE CENTER - CENTER, A[deg]: SEAT TUBE ANGLE, B[deg]: HEADTUBE ANGLE, P: CHAINSTAY, T: HEADTUBE, D: BB DROP, R: FORK RAKE, G: FORK HEIGHT, REACH, STACK". TOP TUBE: the drawing beside the table draws L horizontal at head tube top height from the seat tube line to the head tube line, so L is recorded as top_tube_effective. STACK DATUM: the drawing (read only for its letters and datums, not stored) takes STACK from the bottom bracket centre up to a horizontal line at the top of the head tube under the stem, and REACH to the same point; no words say whether a headset cover is included, so stack_datum is null. Not published, so null: standover, stock stem and bar per size. Model year is not printed on the page (null). Columns CE, CC, L, I, A, B, F, P, T, D, R, G, WB, REACH, STACK, TRAIL; the legend ends "TRAIL (45MM TIRE)", so the printed trail assumes a 45 mm tyre, which is the stock tyre "VITTORIA TERRENO T50 45" (tyre_width_mm 45). F is not in the legend; it is recorded as front_centre because sqrt(P^2 - D^2) + sqrt(F^2 - D^2) gives the printed WB on every size (within 0.1 mm); WB is the wheelbase; I (the horizontal distance from the top of the seat tube line to the vertical through the BB, equal to CC x cos A on every size) is not in the schema. Fork rake 55 on the three small sizes and 50 on the three large. The F9, F7, F5, F3 and F1 pages print the identical table. Source: html table (official Pinarello global English product page "NEW GREVIL F9 SRAM RED XPLR AXS", section "Geometries": the table in the page markup; fetched 2026-10-20, HTTP 200)