Pinarello Bolide F TT
Time trial · 4 sizes
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Pinarello Bolide F TT · Time trial · 4 sizes
- Geometry
- pinarello.com, fetched 20 Oct 2026, re-checked, no differences
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 15 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 22 October 2026 · 686 bikes, 74 makes, 3,984 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The 52 drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm. A dashed tube is a number the maker left out (est.).
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Generic stem and barAssumedNo bar is listed for this frame.
Frame facts
not read off the maker's page yet: pinarello.com- Tyre clearance
- not recorded yet
- Bottom bracket
- not recorded yet
- Axles and brakes
- not recorded yet
- UDH
- not recorded yet
- Seatpost
- not recorded yet
- Frame weight
- not recorded yet
In the maker's words
Kept whole, as I read it off pinarello.com.Time trial front end: "INTEGRATED HANDLEBAR: custom most tt bar" (no dimensions published).
Cockpit and seatpost, in the maker's words · 23 words
Time trial front end: "INTEGRATED HANDLEBAR: custom most tt bar" (no dimensions published). integrated_cockpit is false because a drop-bar cockpit does not apply.
OFFICIAL SOURCE: Pinarello product page NEW Bolide F TT (https://pinarello.com/global/en/bikes/road/competition/bolide-f/bolide-f). Source: html table (official Pinarello global English product page "NEW Bolide F TT", section "Geometries": the table in the page markup; fetched 2026-10-20
How I read the maker's table
The table has NO size column: Pinarello names a frame size by its seat tube centre-to-centre length in cm (the Dogma F page's weight line reads "Weight in size 53"; the CC column prints 530 on that row), so size_label is the CC column written in cm (CC 430 -> "43", 465 -> "46.5"); nothing else is derived. Column mapping: CE (seat tube centre to end) -> seat_tube_length; CC (centre to centre) -> size label; L -> top_tube_effective; A -> seat_tube_angle; B -> head_tube_angle; P -> chainstay; T -> head_tube_length; D -> bb_drop; R (fork rake) -> fork_offset; G (fork height, axle to crown) not in the schema; REACH -> reach; STACK -> stack. The legend beside the table reads "CE: SEAT TUBE CENTER - END, CC: SEAT TUBE CENTER - CENTER, L: TOP TUBE CENTER - CENTER, A[deg]: SEAT TUBE ANGLE, B[deg]: HEADTUBE ANGLE, P: CHAINSTAY, T: HEADTUBE, D: BB DROP, R: FORK RAKE, G: FORK HEIGHT, REACH, STACK". TOP TUBE: the drawing beside the table draws L horizontal at head tube top height from the seat tube line to the head tube line, so L is recorded as top_tube_effective. STACK DATUM: the drawing (read only for its letters and datums, not stored) takes STACK from the bottom bracket centre up to a horizontal line at the top of the head tube under the stem, and REACH to the same point; no words say whether a headset cover is included, so stack_datum is null. Not published, so null: wheelbase, front centre, trail, standover, stock stem and bar per size. Model year is not printed on the page (null). Four sizes; the stack and reach here are frame numbers, before the base bar and extensions.
Source: html table (official Pinarello global English product page "NEW Bolide F TT", section "Geometries": the table in the page markup; fetched 2026-10-20, HTTP 200)