Mason Aspect Integrale
Endurance road · 8 sizes
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Mason Aspect Integrale · Endurance road · 8 sizes
- Geometry
- masoncycles.cc, fetched 20 Oct 2026, re-checked, no differences
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 15 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 22 October 2026 · 686 bikes, 74 makes, 3,984 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.| Size | Stack (mm) | Reach (mm) | Head angle (deg) | Seat angle (deg) | Head tube (mm) | Chainstay (mm) | Wheelbase (mm) | Standover (mm) |
|---|---|---|---|---|---|---|---|---|
| 48CM | 534 | 370 | 71 | 74.5 | 135 | 425 | 995 | 723 |
| 50CM | 554.5 | 376.8 | 71.5 | 74.5 | 155 | 425 | 1004.5 | 744 |
| 52CM | 569 | 377.5 | 71.5 | 74.5 | 170 | 425 | 1009.2 | 763 |
| 54CM | 581.6 | 378 | 71.5 | 73.5 | 185 | 425 | 1014.7 | 780 |
| 56CM | 596 | 383 | 71.5 | 73.5 | 200 | 425 | 1024.7 | 797 |
| 58CM | 607.3 | 390 | 72 | 72.5 | 210 | 425 | 1029.8 | 813 |
| 60CM | 615.5 | 391.5 | 72 | 72.5 | 220 | 425 | 1035.2 | 830 |
| 62CM | 626.8 | 403.5 | 72.5 | 72.5 | 230 | 425 | 1045.3 | 846 |
The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The 56CM drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Generic stem and barAssumedNo bar is listed for this frame.
Stock stem per size50CM 90 mm, 52CM 90 mm, 54CM 100 mm, 56CM 110 mm, 58CM 110 mm, 60CM 120 mm, 62CM 120 mm. The maker publishes no bar width per size.
Frame facts
read from the maker's words, not a table: masoncycles.cc- Tyre clearance
- 36 mm
- Bottom bracket
- not recorded yet
- Axles and brakes
- not recorded yet
- UDH
- not recorded yet
- Seatpost
- not recorded yet
- Frame weight
- not recorded yet
In the maker's words
Kept whole, as I read it off masoncycles.cc.No cockpit with the frameset.
Cockpit and seatpost, in the maker's words · 70 words
No cockpit with the frameset. The frame is "built with the Deda Elementi 'DCR' Integrated routing system" (hoses run inside the head tube) with the MASON x Deda AR fork; the page names no bar or stem and the chart has no handlebar row. Its STEM row prints 80/90 (48CM), 90 (50CM and 52CM), 100 (54CM), 110 (56CM and 58CM), 120 (60CM and 62CM) mm. A Deda headset is included.
OFFICIAL SOURCE: Mason Cycles product page for the Aspect Integrale Frameset ("tailored for the clean lines of fully integrated routing", made to order, lower crown height than the Aspect2), eight sizes 48CM to 62CM, labels as printed. Source: html table (official Mason Cycles product page "Aspect Integrale Frameset", the "Full geometry chart" table in the page markup; fetched 2026-10-20
How I read the maker's table
Some angle cells carry a degree sign in the markup (71.5º), stripped by the parser. Stack datum: the page's geometry diagram (/media/images/diagram-geometry.png, read for the datum only, not stored) draws stack and reach to the head tube top; no headset cover height is given. This chart has no HANDLEBAR row, so stock_bar_width is null; stock_stem_length null on 48CM where "80/90" is printed. TRAIL carries the remark "Trail data for more wheel/tyres in full geo. chart (where applicable)" but only one trail row is printed and its tyre is not named. FORK CROWN HEIGHT 367 (MASON x Deda AR fork, 450gr). integrated_cockpit is false: the routing is integrated through a two-piece bar and stem, no one-piece cockpit is named. Max tyre clearance "700C x 35mm [approx. 700C x 32mm with mudguards]"; fork "Clearance for up to 36mm tyres". Model year: not printed on the page (model_year null). Not found on Bike Insights.
Source: html table (official Mason Cycles product page "Aspect Integrale Frameset", the "Full geometry chart" table in the page markup; fetched 2026-10-20, HTTP 200)