Incolor Voyager

INTEGRATED one-piece bar/stem: the frameset kit (Voyager product manual dated 260213, page 8) lists "GRAVEL frame/fork; GRAVEL integrated cockpit, carbon fiber seat post; lightweight aluminum accessory package". The only gravel cockpit in Incolor's range is the AEROWAV GRAVEL GC1 (manual dated 251129, https://en.incolor.vip/uploads/upload/files/20260414/9a799b379a139ba7a2936f6dde546649.pdf; CNY 1380 sold separately): T800 carbon, 340 g; stem lengths (A) 80 / 90 / 100 / 110 mm; ONE width only, 380 mm at the tops/hoods (B, "把横上宽度") and 440 mm at the drops (C, "把横下宽度"), so the drops flare 30 mm per side; bar reach 70 mm; bar drop 115 mm; the bar top is raised 20 mm above the stem line ("等效+20mm堆高" = equivalent to +20 mm of stack); other dimensions printed on the drawing: 72.5 deg between stem axis and steerer axis (about 17.5 deg below perpendicular, so near-horizontal on the Voyager's 70-72 deg head angles), 37.5 (stem clamp height at the steerer, mm assumed), 20, 2.5, 10 deg and 3.0 deg (drops tilt) - the manual does not name these. Accessory pack: aluminium computer mount, top cap ("压盖"), stem bottom cover, and six 5 mm split spacers (30 mm total); the cockpit page reads "30mm 内圈 + 20mm 上抬" (30 mm of spacers plus 20 mm bar rise). Max steerer spacer height NOT published. No per-size stem length is stated anywhere (stock_stem_length left null); stock_bar_width 380 is the GC1's single top width, not a per-size choice. Headset: "1.5-inch headset" (upper and lower bearing sizes not stated beyond that). Seatpost: "27.2mm round seatpost" (web page) / "carbon fiber seat post" (manual); seatpost length and offset NOT published as text; the geometry drawing shows a "10" dimension at the seatpost head parallel to the seat tube axis, read as a 10 mm setback seatpost (assumption). Fork axle-to-crown 380 mm (drawing, all sizes); 700c wheels (drawing "Ø700"); max tyre 45C (32C max with a 52/36T double); 50T single or 52/36T double chainring; UDH dropout; T800 carbon, frame 850 g (size 54, unpainted, without metal parts); BB stiffness 190 N/mm claimed.

the Chinese site https://www.incolor.vip/voyager has the identical table ("VOYAGER几何表"); the page's "Click to view the original image" links to https://en.incolor.vip/uploads/upload/images/20260715/2904d5c5351949632ddf170f2c2f9cbb.jpg (diagram + table) and the inline diagram is https://en.incolor.vip/uploads/upload/images/20260710/332f01f85ca9f748e391a3f4aebd5298.png; the VOYAGER product manual PDF (https://en.incolor.vip/uploads/upload/files/20260414/472a9d471a13ad4c42c36dea51cf22da.pdf, dated 260213) page 7 prints the same table. All three agree on every number. No aggregator was consulted. SIZE NAMING: sizes are plain numbers 45 / 48 / 51 / 54 / 57 with recommended rider heights 155-162 / 162-168 / 167-173 / 172-178 / 177-186 cm; seat tube length is NOT published so the labels cannot be confirmed as seat tube lengths (assumed nominal cm). STACK/REACH DATUM: drawing B (stack) runs vertically from the BB centre to the horizontal at the top of the head tube; A (reach) runs horizontally from the vertical through the BB centre to the same head tube top point - the usual frame-only convention, headset not included. TOP TUBE: the HTML row is mis-lettered "G Top Tube Length" but the image/PDF letter it M and the Chinese table calls it "水平上管长度" (horizontal top tube length), i.e. effective/horizontal. E "Front Center" and F "Rear Center" are drawn axle-to-BB-centre direct distances; F = chainstay. L "Stand over" is drawn from the ground to the top of the top tube at mid-length. I "Front Fork Offset" is 53.7 mm on 45/48 and 49.7 mm on 51/54/57 (two forks); J "Trail" is printed by the maker, not derived. Fork axle-to-crown 380 mm is on the drawing only (no schema field). MODEL YEAR: Incolor does not use model years; the brand's own WeChat launch article "VOYAGER正式上市" (https://mp.weixin.qq.com/s/fnFsdNQ4O7W-fW1iW2L1vg) was published 2025-05-06, the manual is dated 2026-02-13 and the site table image was uploaded 2026-07-10/15 with the same numbers, so model_year 2025 = launch year, table current as of 2026-08-29. The page also has an ECharts stack/reach scatter labelled "Customization" (red) vs "Standard" (black); its black points (364/515, 370/520, 375/530, 385/535, 395/570) do NOT match the table, so it is treated as an illustration that Incolor offers custom geometry ("可定制几何"), not as data.