Colnago TT2
Time trial · 4 sizes
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Colnago TT2 · Time trial · 4 sizes
- Geometry
- colnago.com, fetched 20 Oct 2026, re-checked, no differences
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 15 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 22 October 2026 · 686 bikes, 74 makes, 3,984 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The M drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm. A dashed tube is a number the maker left out (est.).
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Generic stem and barAssumedNo bar is listed for this frame.
Frame facts
read from the maker's words, not a table: colnago.com- Tyre clearance
- not recorded yet
- Bottom bracket
- not recorded yet
- Axles and brakes
- not recorded yet
- UDH
- not recorded yet
- Seatpost
- 0 mm offset
- Frame weight
- not recorded yet
In the maker's words
Kept whole, as I read it off colnago.com."Colnago TT2 time trial handlebar (360mm C-C) + stem cover included.
Cockpit and seatpost, in the maker's words · 16 words
"Colnago TT2 time trial handlebar (360mm C-C) + stem cover included. Time trial extensions not included."
OFFICIAL SOURCE: Colnago's TT2 page (https://www.colnago.com/en-us/products/tt2-bike). Source: html table (official Colnago product page, its size tabs parsed from the markup; the page links no geometry chart; fetched 2026-10-20
How I read the maker's table
Column mapping: reach; stack; head_tube_angle; seat_tube_angle; front_centre; chainstay; wheelbase; fork_offset; trail; bb_drop; standover. Size labels as printed (XS, S, M, L). There is no chart or drawing; the size tabs use the same letters as Colnago's charts (O horizontal top tube, Ss head angle, Sc seat angle, C chainstay, A front centre). Not published, so null: seat tube length, head tube length, top tube, stock stem, stock bar. SOURCE: the TT2 page links no geometry chart; every number is from the page's own size tabs. stack and reach are the frame values ("Stack (Frame)", "Reach (Frame)"); the page also prints both to the centre of the extension base (Reach 466/482/497/512, Stack 499/502/530/552), not in the schema. Trail is printed for a 28-622 tyre, as "70mm", "62", "62mm", "62mm" (units as printed); fork length 367 mm; seatpost "0 mm offset, +22.5 mm offset available as a spare part". Model year is not printed (null).
Source: html table (official Colnago product page, its size tabs parsed from the markup; the page links no geometry chart; fetched 2026-10-20, HTTP 200)