Cannondale SuperSix EVO CX / SE
Road · 5 sizes
Sign in and add the bike you ride, and this table will say what each size needs for your position.
Sign in
This is the bike I ride
No account is needed to read the table. Report a wrong number · Correct this bike
- Bike
- Cannondale SuperSix EVO CX / SE · Road · 5 sizes
- Geometry
- cannondale.com, fetched 20 Oct 2026, re-checked, no differences
- Cockpit
- Generic stem and bar, assumed
- Solved with
- cover 15 mm (assumed), max spacers 40 mm (assumed), stem clamp centre 20 mm (assumed), so every verdict carries ±10 mm at the bar
- Sheet
- 22 October 2026 · 686 bikes, 74 makes, 3,984 sizes in the catalogue
Geometry, every size, from the maker's table
The tinted row is the size drawn beside it. Press a size to draw it.The table runs on to the right: 6 more columns after Reach. Scroll it sideways to read them.
The 54 drawn to scale from the table, with no build on it. Stack and reach run from the bottom bracket to the top of the head tube; every size is solved from those two. One square is 100 mm.
The maker's cockpit
No stock cockpit I can name, so every size is solved on a generic stem and bar unless you choose one on the sheet.Generic stem and barAssumedNo bar is listed for this frame.
Frame facts
read from the maker's words, not a table: cannondale.com- Tyre clearance
- not recorded yet
- Bottom bracket
- PF30
- Axles and brakes
- 12x142 rear
- UDH
- not recorded yet
- Seatpost
- not recorded yet
- Frame weight
- not recorded yet
In the maker's words
Kept whole, as I read it off cannondale.com.Sold as a frameset on this page: no bar or stem.
Cockpit and seatpost, in the maker's words · 38 words
Sold as a frameset on this page: no bar or stem. Fork "1-1/8" to 1-1/2", 55mm offset" (round steerer, two-piece cockpit). Seatpost included: "HollowGram 27 SL KNOT, Carbon, 2 bolt clamp, 330mm, 0mm offset (46cm), 15mm offset (51-58cm)".
OFFICIAL SOURCE: Cannondale US product page for the SuperSix EVO CX SE Frameset C11381U (SalsifyId 3545-COLL2021, ModelYear 2021, Category Road, Subcategory Cyclocross in the product data feed), still live on 2026-10-20. Source: image_table (official Cannondale US product page "SuperSix EVO CX/SE Frameset", "Geometry" section is a single image
How I read the maker's table
The GB site keeps the SuperSix EVO CX (cyclocross) and SuperSix EVO SE (gravel) family pages but sells no product and shows no table on them. One table covers both the CX and the SE (heading "SuperSix Evo CX / SE"). The data feed carries Geometry null for every variant, so the image is the only table. UNITS: lengths printed in centimetres to one decimal; every length here is the printed value x 10, angles as printed. STACK DATUM: O is drawn to a horizontal through the top of the head tube where G starts. Frame: "SuperSix EVO CX Carbon, internal cable routing w/ Switchplate, 12x142mm Speed Release thru-axle, PF30-83 Ai". Frameset only, so no stock tyre (tyre_width_mm null) and no stock stem or bar. posts: the HollowGram seatpost offsets the frameset spec lists per size. CHECK NOTE: the printed top tubes are 6.6 to 9.6 mm shorter than the maker's own stack, reach and seat angle imply (top tube = reach + stack / tan(seat angle)), on every size; the image was re-read at native resolution and the numbers are as printed, so the table is not internally closed on the seat angle; nothing is changed.
Source: image_table (official Cannondale US product page "SuperSix EVO CX/SE Frameset", "Geometry" section is a single image: https://www.cannondale.com/-/media/images/my21/bikes/road/cyclocross/supersix-evo-cx/pdp-page/cy21_supersixevo_cxse_frameset_geotable.ashx, 7500x11220 px PNG, diagram + table headed "SuperSix Evo CX / SE"; numbers read from the image by the collector, image NOT stored)